A、 环境系统包括的那些装置和部件,提供增压、加热、冷却、湿度控制和过滤,并对压力密封的机身区域的通风空气进行处理。
B、 通风系统包括的装置和部件可以用于加压、加热、冷却,湿度控制、处理空气,从而为压力密封内区域通风。
C、 循环系统包括那些装置和部件,提供释压、加热、冷却、温度控制、压缩和处理空气,来为压边封严条内的区域通风。
答案:A
A、 环境系统包括的那些装置和部件,提供增压、加热、冷却、湿度控制和过滤,并对压力密封的机身区域的通风空气进行处理。
B、 通风系统包括的装置和部件可以用于加压、加热、冷却,湿度控制、处理空气,从而为压力密封内区域通风。
C、 循环系统包括那些装置和部件,提供释压、加热、冷却、温度控制、压缩和处理空气,来为压边封严条内的区域通风。
答案:A
A. 为避免由于磁通线引起的温度读数偏差,不要将热电偶导线与电源线邻近或穿过。
B. 为避免由于磁感线引起的温度读数误差,不要将热电偶与电缆邻近或交叉。
C. 不要将热电偶导线与电源线靠近或相交,以防止由于磁通线引起的错误温度读数。
A. 装配可移动式的举升机用来吊起指定的齿轮箱。
B. 在提升齿轮箱之前装配移动式起重机。
C. 拆下齿轮箱用来装配可移动式的举升机。
A. 这些ALIs 是强制性的,未经负责飞机型号证书的FAA 办公室或适用的监管机构的批准,不能更改或删除。
B. 这些ALIs 是指令性的,未经FAA办公室批准不得更改或删除。FAA办公室负责飞机型号证书,或发布适用的管理规章。
C. 这些ALIs 是非常必要的,任何更改或删除必须获得FAA办公室批准,或者其他可以颁发飞机型号证书的监管机构的批准。
A. 对退漆后的表面的修理必须是面积小于100平方英寸(645平方厘米),如果超过这一面积,则必须得到额外批准。
B. 对于分层的表面修理,面积不得超过100平方英寸(645平方厘米)。如果超出,你必须做部分更换。
C. 装饰面的修补面积必须小于100平方英寸(645平方厘米),如果超过这一面积,则必须更换该部件。
A. 通过最少两个全循环操作副翼,并操作至其最大行程。
B. 至少完整操作副翼两个全循环至其最大行程。
C. 操作副翼最小两个单位,至其最大行程。
A. 包括折叠页和章节的起始页在内,所有页面均应双面打印。
B. 除折叠页外,章节的起始页和所有页面均应双面打印。
C. 除折叠页和章节的起始页外,所有页面均应双面打印。
A. 该部件中的空气循环使得特定部件的温度不超限。
B. 某些部件的温度不超限因此该部件中的空气能够流动。
C. 该部件中的空气的旋转和特殊部件的温度均不超限。
A. 如果你认为会下雪,请确保容器置于适当的温度条件中。
B. 如果你认为会下雪,请确保车辆处于合适的配置。
C. 如果你认为会下雪,请确保车速处于合适的范围之内。
A. 使用容器混合材料。
B. 使用棍子搅拌材料。
C. 使用铲子混合材料。
A. 飞机维修手册或章节至少包括下列信息:说明性信息,包括对维修或预防性维修所需要的飞机特性和数据的说明。
B. 飞机维修手册包括的内容至少有一些说明性信息,其包括对大修或预防性维修所需要的飞机特性和数据的说明。
C. 飞机维修手册或章节不仅包括下列信息,还包括对大修或预防性维修所需要的飞机特性和数据的说明。