The disassembly fixture lets you disassemble the module.

A. Print all pages besides wiring diagrams and foldouts on both sides.

B. Print all pages other than wiring diagrams and foldouts on both sides.

C. Print all pages no more than wiring diagrams and foldouts on both sides.

A. Use of cabin pressurization during Takeoff, landing, or in flight shall be carefully restricted.

B. Use of cabin pressurization during Takeoff, landing, or in flight has limitations that shall be observed.

C. You shall follow the strict requirements when using cabin pressurization during Takeoff, landing, or in flight.

A. If the hydraulic pump turns to generate pressure of 3000 psi, use the electric pump.

B. If the hydraulic pump fails to generate pressure of 3000 psi, use the electric pump.

C. If the hydraulic pump turns to supply pressure of 3000 psi, use the electric pump.

A. This document and the applicable airplane maintenance manual(s) complement each other.

B. This document may supplement the aircraft maintenance manual(s) as appropriate.

C. This document is explanation to the airplane maintenance manual(s).

A. Utilizing an airplane as intended by the manufacturer and sound inspection and maintenance practices is basis that assures the airplane remains airworthy and safe to operate.

B. One of the basis for assuring the airplane remains airworthy and safe to operate is sound inspection and maintenance practices and forms.

C. Utilizing an airplane as intended by the manufacturer is the only basis for assuring the airplane remains airworthy and safe to operate.

A. Perform these checks without any schedule.

B. Perform these checks immediately.

C. Do these checks regularly.

A. Incorrect adjustment of the stops will lead to accurate test results.

B. In precision, test results cannot occur unless the stops are adjusted properly.

C. If the stops are not adjusted Incorrectly, the test results will not be precise.

A. These tests need no special equipment or facilities except those installed on the aircraft, and are like the tests performed by flight crews.

B. These tests need some special equipment or facilities that are not installed on the aircraft. And these tests are the same to the tests performed by flight crews.

C. These tests need special equipment or facilities that are installed on the aircraft, and are identical with the tests performed by flight crews.

A. To open the containers for these materials, suitable tools must be used.

B. The appropriate tools should be selected to open the materials, the containers is inside the materials.

C. The inappropriate tools should be selected to open the containers, the containers is made in the materials.

A. Clean the elastic surfaces that are transparent.

B. Clean the plastic surfaces that are not transparent.

C. Clean the plastic surfaces that are not vague.