The AFDS consists of three separate autopilot channels and a single Mode Control Panel(MCP)

A. Through releasing the handle, the gas start to inflate the slide-raft .

B. Operation of the handle releases the gas which can inflate the slide-raft.

C. The gas handle operates to inflate the slide-raft.

A. Data and parameters are gathered by three computers from the systems and put together on the data link to the display unit.

B. Data and parameters are generated by three computers in the system and are displayed on the display unit through the data link.

C. After analyzing the data and parameters from the system, three computers send the final result to the data link for display.

A. If this specification is written in professional terms, the problems won＇t arise.

B. This specification agrees with recognized industry practices, and the problems can＇t be avoided according to this specification.

C. If this specification is written in professional terms, the problems will be treated adequately.

A. Utilizing an airplane as intended by the manufacturer and sound inspection and maintenance practices is basis that assures the airplane remains airworthy and safe to operate.

B. One of the basis for assuring the airplane remains airworthy and safe to operate is sound inspection and maintenance practices and forms.

C. Utilizing an airplane as intended by the manufacturer is the only basis for assuring the airplane remains airworthy and safe to operate.

A. Make sure the drain hose＇s open end is oriented in align with the structure.

B. Direct the open end of the drain hose away from the storage construction.

C. Ensure that the open end of the drain hose faces away from the structure.

A. Consult Table 7001 for information unrelated to the fabrication of the pivot assembly.

B. To obtain information about the manufacturing of the pivot assembly, refer to Table 7001.

C. Table 7001 contains details about all component except for the pivot assembly.

A. The manufacturer shall prepare all text in either one or two columns with justification at his own discretion , but, two columns are preferable for readability.

B. Manufacturers shall prepare all text both in one and two columns separately; however, two columns are better for reading.

C. According to the manufacturer＇ explanations, all text shall be prepared in one or two columns; however, two columns have better visual effect.

A. Uncontrolled system or old equipment cause hydraulic fluid flow from hydraulic system A to B.

B. If you fail to operate the system control properly or the equipment is damaged, the hydraulic fluid will be transferred between hydraulic system A and B.

C. Flow of hydraulic fluid between hydraulic system A and B result in accidental operation of system controls or damaged equipment.

A. Notes emphasize conditions such as operating procedures, inspection, repair or maintenance, etc., which may be met as appropriate.

B. Notes emphasize the conditions of operation procedure, inspection, repair or maintenance, etc., must be followed.

C. Conditions for operating procedures, inspection, repair or maintenance, etc. must be emphasized in the notes.

A. On the cover page, there should be the title and corresponding aircraft name displayed on the spine of the Handbook. Some other information may also be shown on the cover.

B. The title and corresponding aircraft name should be prominently displayed on the cover page or on the spine of the manual. Other information can also be displayed on the cover.

C. On the cover page, the title and the applicable aircraft name shall be prominently displayed or on the spine of the Handbook. Other information can also be displayed on the cover.