The operator uses an external joystick and control panel to set the configuration and operate the system.

A. Clean the elastic surfaces that are transparent.

B. Clean the plastic surfaces that are not transparent.

C. Clean the plastic surfaces that are not vague.

A. Ensure that the label adheres tightly to the surface and that no bubbles are present.

B. Verify the full attachment of the label to the surface and accept the presence of bubbles.

C. Make sure the label is partially attached to the surface, ensuring there are no bubbles present.

A. Keep the caps off the hoses.

B. Make sure the caps are off from the hoses.

C. Take the caps off the flexible pipe.

A. Choose the hydraulic system you will apply pressure.

B. Pressurize the selected hydraulic system.

C. Choose the hydraulic system you will depressurize.

A. The CAP compiler should determine the format and layout, it is desirable that the format and layout should be similar to the compiler＇s current documents.

B. The format and layout should be determined by the CAP producer, it is intended that the format and layout shall be similar to the producer＇s existing files.

C. The format and layout should be determined by the CAP producer, recognized that it is desirable the format and layout should be the same as the producer＇s existing documentaries.

A. The manufacturer may establish procedures to provide drawback on unairworthy conditions.

B. The manufacturer may establish procedures to provide response on unairworthy conditions.

C. The manufacturer may establish procedures to provide recall on unairworthy conditions.

A. By using the basic provisions of FAR 21.50, revisions become consistent with the format of the specification.

B. FAR 21.50 provisions are the basic to the revisions which are consistent with the format of the specification.

C. To make revisions consistent with the format of the specification, the provisions of FAR 21.50 should be adopted as a basis.

A. The manufacturer shall prepare all text in either one or two columns with justification at his own discretion , but, two columns are preferable for readability.

B. Manufacturers shall prepare all text both in one and two columns separately; however, two columns are better for reading.

C. According to the manufacturer＇ explanations, all text shall be prepared in one or two columns; however, two columns have better visual effect.

A. Using a locally made tool to do the test is also accepted.

B. You can also make a local tool to do this test.

C. You can also make a tool to do this test locally.

A. The AFDS monitors three separate autopilot channels and a single Mode Control Panel(MCP)

B. The AFDS constitutes three separate autopilot channels and a single Mode Control Panel(MCP)

C. The AFDS contains three separate autopilot channels and a single Mode Control Panel(MCP)