A、 The description could be pronounced in the active voice.
B、 Descriptive content can be written in active voice.
C、 You should read it in voice as you write the descriptive text.
答案：B
A、 The description could be pronounced in the active voice.
B、 Descriptive content can be written in active voice.
C、 You should read it in voice as you write the descriptive text.
答案：B
A. According to instrument error and compressibility effects, Outside Air Temperature is corrected.
B. Outside Air Temperature is set to avoid instrument error and compressibility effects.
C. Due to instrument error and compressibility effects, Outside Air Temperature is modified.
A. Section 1 of the Pilot＇s Operating Handbook shall introduce basic data and information of general interest to the pilot. The data and information is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
B. Section 1 of the Pilot＇s Operating Handbook shall present basic data and information of general interest to the pilot. The general interest is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
C. Section 1 of the Pilot＇s Operating Handbook shall present basic data and information of general interest to the pilot. The pilot is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
A. If there is hum from the loudspeaker, don＇t adjust the potentiometer.
B. Adjust the potentiometer unless hear a hum from the loudspeaker .
C. Adjust the potentiometer until the loudspeaker no longer hums.
A. As the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the rudder actuator below.
B. In order to depressurize standby system, the hydraulic system A must be depressurized to open the rudder hydraulic system selector valve and let hydraulic fluid flow to the lower rudder actuator.
C. Due to the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the bottom rudder actuator.
A. If a supply shutoff valve was closed within five minutes, no maintenance performance is needed and shutoff periods are not accumulated.
B. Maintenance action is not necessary and shutoff periods are not calculated unless the shutoff valve was closed for less than five minutes.
C. When a supply shutoff valve was closed for five minutes, maintenance action is hardly required and shutoff duration are not included.
A. Manufacturer determines specific range properly to describe sophisticated and professional information. The information can be put in Maintenance Maunal or other documents.
B. Detailed information on more intricate and specific subjects can be written in two ways: Maintenance Manual or individual documents. The two ways are dependent on manufacturer＇s option properly.
C. It is up to the manufacturer to decide where and to what extent to include detailed information about more sophisticated and professional topics, either in the common Maintenance Manual or in another new documents.
A. This specification provides for the preparation and insurance of more complex manuals for less complex aircraft than aircraft operated by large scheduled airlines, while achieving industry-wide standardization of naming and formatting.
B. The specification is used to prepare and release simpler manuals for less complicated aircraft rather than the aircraft operated by large scheduled airlines while achieving industry-wide standardization of terminology and format.
C. This specification specifies the preparation and release of less complex manuals for aircraft that are less complex and operated by large scheduled airlines, and realizes the industry wide standardization of terms and formats.
A. The shim is t,which is thick by calculating x and y.
B. Calculate the shim,the result of the thickness is x-y .
C. The thickness of the shim is thus calculated: t=x-y.
A. Sometimes you have to change long sentences to shorter ones, remove unnecessary information, or ask an engineer to get further explanation.
B. Some time you have to incorporate long sentences into shorter ones, decrease unnecessary information, or require an engineer for further instruction.
C. Sometime you must illuminate long sentences into shorter ones, ignore information which is not necessary, or order an engineer for further definition.
A. The responsibility of ABC is not to modify the airplanes that belong to STC.
B. It is not STC＇s responsibility to modify ABC＇s aircraft.
C. ABC is not in charge of the aircraft modified by STC.
