A、 Notes emphasize conditions such as operating procedures, inspection, repair or maintenance, etc., which may be met as appropriate.
B、 Notes emphasize the conditions of operation procedure, inspection, repair or maintenance, etc., must be followed.
C、 Conditions for operating procedures, inspection, repair or maintenance, etc. must be emphasized in the notes.
答案：C
A、 Notes emphasize conditions such as operating procedures, inspection, repair or maintenance, etc., which may be met as appropriate.
B、 Notes emphasize the conditions of operation procedure, inspection, repair or maintenance, etc., must be followed.
C、 Conditions for operating procedures, inspection, repair or maintenance, etc. must be emphasized in the notes.
答案：C
A. Operator is in charge of the maintenance of the handbook.
B. The handbook should be kept current by the operator.
C. The operator should store the handbook in a proper status.
A. There are several steps to replace the light assembly.
B. The steps to replace the light assembly are not complicated.
C. The following steps are to change the light component.
A. Restrictions on use of cabin pressurization during Takeoff, landing, or in flight shall be noted
B. That portion of the system is used to de-ice all airfoil surfaces once ice is formed.
C. All airfoil surfaces are equipped with that portion of the system to stop ice formation.
A. The color of the bottom mark on the plate is amber.
B. You can see the red bottom mark on the board.
C. There is no color of the bottom mark on the board.
A. The unit of all range distances shall be nautical mile.
B. We measure all range distances in accurate miles.
C. The range of distances shall be calculated in knots.
A. Use of cabin pressurization during Takeoff, landing, or in flight shall be carefully restricted.
B. Use of cabin pressurization during Takeoff, landing, or in flight has limitations that shall be observed.
C. You shall follow the strict requirements when using cabin pressurization during Takeoff, landing, or in flight.
A. The routing of the cable loom may have been altered by the installation.
B. The routing of the cable loom may have been held by the installation.
C. The routing of the cable loom may have been defended by the installation.
A. If a chapter is deleted by merging with other chapters, the original chapter title will be listed in the table of contents at the front of the manual and the location will be indicated in the reference materials.
B. Where chapters have been eliminatd through combining with other chapters, the original chapter title will be listed in the table of contents at the front of the manual,and the material will be located in the original chapter.
C. If a chapter is deleted by other chapters, the original chapter title will be listed in the table of contents at the front of the manual and the location will be indicated in the reference materials.
A. Using a locally made tool to do the test is also accepted.
B. You can also make a local tool to do this test.
C. You can also make a tool to do this test locally.
A. Pressurization of the pneumatic crossover manifold and use of an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance is the second method.
B. You can use the second method to pressurize crossover manifold and use an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance.
C. The second method is that it is not necessary to pressurize the pneumatic crossover manifold but to use an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance.
