A、 Using either method, the item to be checked is in the list of the desired condition.
B、 Either way, check the listed item whose desired condition is stated.
C、 No matter which method is used, the item to be checked is listed and its desired condition is presented.
答案:C
A、 Using either method, the item to be checked is in the list of the desired condition.
B、 Either way, check the listed item whose desired condition is stated.
C、 No matter which method is used, the item to be checked is listed and its desired condition is presented.
答案:C
A. Move the IDG forward and outboard until it is away from the accessory gearbox, QAD ring and power plant.
B. Move the IDG towards the forward position until the input shaft is away from the accessary gearbox and QAD ring, then move the IDG towards outboard and free of the power plant.
C. After moving the IDG towards the forward position, then it is free of the accessary gearbox, QAD and the power plant.
A. The lower seal appears as the lower bearing is pulled down.
B. You can see the lower seal before pulling the lower bearing down.
C. Only after you pull the lower seal down can you see the lower bearing.
A. Manufacturers would like to reserve and exercise the right to make reasonable judgments about the depth and scope of the contents of their publications.
B. Manufacturers are requested to reserve and exercise the right to judge contents of their publications of reasonable depth and scope.
C. Manufacturers are required to reserve the right of sound judgment on the contents of their publications by the bureau.
A. If you want to use the STE specification properly, a high professional standard is required.
B. A high level of professionalism requires the correct use of STE specifications.
C. In order to use the STE specifications appropriately, high professionalism is needed.
A. Keep the caps off the hoses.
B. Make sure the caps are off from the hoses.
C. Take the caps off the flexible pipe.
A. Rivets can be used to separate the two stringers.
B. You can use two rivets to attach the stringers together.
C. Use rivets to connect the two stringers together.
A. This data sheet defines that the product, published by the type certificate, satisfies the airworthiness necessities complying with the conditions and limitations.
B. The product, for which the type certificate was approved, should reach the airworthiness requirements within conditions and limitations stipulating by this data sheet.
C. This data sheet regulates conditions and limitations of the airworthiness demands that the product, which has the qualified type certificate, should fulfill.
A. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.neither short-term nor long-term.
B. Instructions required for parking or storing the aircraft under normal or abnormal conditions, such as engine removal, aircraft damage, etc., which are used for short-term or long-term under extreme weather conditions.
C. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.either short-term or long-term.
A. Structural fasteners are not included in the normal maintenance items, they are provided separately in the maintenance information.
B. Structural fasteners do not belong to normal maintenance items, so the maintenance information does not include this part of the content.
C. Some structural fasteners can be repaired during normal maintenance, so the maintenance information includes the corresponding content.
A. The wording given in the approved example is of a suggested nature. It only represents approved words for writing the same information. You can express the same thing with different constructions and other approved words.
B. It is necessary to use these terms in the approved example sentences to write standard information. You can choose what to express and how to express it from the approved structure
C. The wording must be approved to indicate that the information should be written to the same standard and you can often use similar structures and words to describe the same thing.