A、 Overhaul of any components covered in this chapter shall be completed in accordance with data other than those provided by the manufacturer.
B、 None of the components covered by this chapter shall be overhauled except in accordance with the manufacturer＇s data.
C、 All components covered in this chapter must be overhauled according to the technical data provided by the manufacturer.
答案：C
A、 Overhaul of any components covered in this chapter shall be completed in accordance with data other than those provided by the manufacturer.
B、 None of the components covered by this chapter shall be overhauled except in accordance with the manufacturer＇s data.
C、 All components covered in this chapter must be overhauled according to the technical data provided by the manufacturer.
答案：C
A. After pressing the LSK next to EXIT, the BITE will take you out of BITE test and the airplane will return to its normal condition.
B. The BITE will continue the BITE test and the airplane will go back to its usual condition when you push the LSK next to EXIT.
C. The BITE will proceed the BITE test and the airplane will go back to its normal configuration after releasing the LSK that is adjacent to EXIT.
A. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive print leakage when printing on both sides.
B. Use good white paper with high strength quality and of adequate weight to delete excessive show-through when printed on both sides.
C. Use white paper with good strength and of sufficient weight and substance to prevent overmuch ink show-through the paper when printed on both sides.
A. Section 1 of the Pilot＇s Operating Handbook shall introduce basic data and information of general interest to the pilot. The data and information is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
B. Section 1 of the Pilot＇s Operating Handbook shall present basic data and information of general interest to the pilot. The general interest is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
C. Section 1 of the Pilot＇s Operating Handbook shall present basic data and information of general interest to the pilot. The pilot is useful in loading, sheltering, handling, and routine preflight checking of the airplane.
A. If the right engine stops, what position will APU servo valve stop at?
B. If the right engine is not running,what position will APU bleed valve stop at?
C. If the right engine stops, will APU servo valve stop at close position?
A. The job is required to be divided into logical steps or operations.
B. This needs to break the work and distribute the logical steps or operations.
C. This requires to destroy the job logically into steps or operations.
A. Each electrical system is identified by a code.
B. Each code of electrical system is identified.
C. Each system is identified by an electrical code.
解析：这道题考察的是英语句子的结构和逻辑关系。正确答案是A: Each electrical system is identified by a code. 这句话的意思是每个电气系统都有一个特定的代码来识别它。在英语中，主语（each electrical system）在句子中通常位于句子的开头，然后是谓语动词（is identified），接着是其他成分。在这个句子中，谓语动词是"identified"，表示识别或辨认的意思，而介词短语"by a code"说明了是通过一个代码来识别电气系统。
举个生动的例子来帮助理解：想象一下你的家里有很多不同的电器，比如电视、冰箱、洗衣机等等，每个电器都有一个独特的电气系统。为了方便管理和维护这些电器，你给每个电器都分配了一个特定的代码，这样你就可以通过这个代码来识别和区分不同的电器。这就好比每个电器都有一个身份证号码一样，通过这个号码可以准确地找到对应的电器。所以，每个电气系统都有一个特定的代码来识别它。
A. Before restarting the engine, make sure to clear the ground from any fuel spills.
B. Remove all spilled fuel from the ground before making the first attempt to start the engine.
C. Ensure that no fuel on the ground is eliminated before proceeding with engine startup.
A. Use the tube if it＇s worked into 3.3 feet long.
B. Use a tube whose length is 3.3 feet.
C. The tube which is used is 3.3 feet length.
A. Procedures for handling malfunctions or other abnormalities that are not emergent, or potentially emergent may be delayed in this section.
B. This Section may cover procedures for handling malfunctions or other deviations that are not of emergency nature, or involve a potential emergency that may be handled later.
C. This Section may cover procedures for handling malfunctions or other deviations that are not emergent, or involve a potential emergency that may be deterred.
A. You can use the module to disassemble the disassembly fixture.
B. The module that you can use to disassemble is the disassembly fixture.
C. You can use the disassembly fixture to disassemble the module.
