Measure the resistance between the antenna baseplate and the airplane skin.

A. Restrictions on use of cabin pressurization during Takeoff, landing, or in flight shall be noted

B. That portion of the system is used to de-ice all airfoil surfaces once ice is formed.

C. All airfoil surfaces are equipped with that portion of the system to stop ice formation.

A. A small amount of oil remains in the starter.

B. Little oil is stored in the starter.

C. The starter consumes a few oil.

A. Mark and protect the parts and then remove the parts.

B. Mark and protect the parts that are removed.

C. Mark and protect the parts that will be removed.

A. The airworthiness and safe operation of an airplane is assured if it＇s used as its original design purpose, properly inspected and carefully maintained.

B. The manufacturer is intended to utilize an airplane with sound inspection and maintenance practices because that is the basis for assuring the airplane remains airworthy and safe to operate.

C. The airplane is designed to be used as the manufacturer＇s intention. Users shall properly inspect the airplane and do sufficient maintenance to assure its airworthiness and operation safety.

A. Ground service bus has no power, but the external power can be supplied.

B. Ground service bus is not energized with external power.

C. Ground service bus is power off when external power is supplied.

A. After flight test, customer will paint aircraft.

B. The aircraft which has been painted will fly to customer after flight test .

C. We will paint aircraft for customer after flight test.

A. If there is no approval of the FAA Oversight Office that manages the airplane model Type Certificate, anyone cannot change or delete these inspection features that are compulsive.

B. These inspection features can be changed or deleted if they don＇t get approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate because they are mandatory.

C. If changing or deleting of these inspection features is approved by the FAA Oversight Office that manages the airplane model Type Certificate, they are mandatory.

A. Rub the basin with water.

B. Flush the basin with water.

C. Fill the basin with water.

A. An "Airplane Weighing Form" shall be included in each handbook and the form shall contain an airplane side view that shows the location of weighing points (using jacking points or landing gear) relative to the datum line.

B. Each handbook shall provide an aircraft side view that is included in an "Airplane Weighing Form" to show the position of weighing points (using jacking points or landing gear) related to the datum line.

C. An airplane three view that shows the weighing points ((using jacking points or undercarriage) relative to the datum line shall be excluded in an "Airplane Weighing Form" of each handbook.

A. These buses consume power directly from the battery.

B. These buses accept the direct current of battery.

C. The battery supplies power directly to these buses.