A、 Ensure that no other repairs are underway in the repair area before undertaking this procedure.
B、 This procedure can only be done if there are other repairs in the repair area.
C、 Only proceed with this procedure if there are concurrent repairs being carried out in the designated repair area.
答案：A
A、 Ensure that no other repairs are underway in the repair area before undertaking this procedure.
B、 This procedure can only be done if there are other repairs in the repair area.
C、 Only proceed with this procedure if there are concurrent repairs being carried out in the designated repair area.
答案：A
A. If one or more blades are broken, make an entry in the engine logbook.
B. If one or more blades are in place , make an entry in the engine logbook.
C. If one or more blades are absent, make an entry in the engine logbook.
A. This data sheet defines that the product, published by the type certificate, satisfies the airworthiness necessities complying with the conditions and limitations.
B. The product, for which the type certificate was approved, should reach the airworthiness requirements within conditions and limitations stipulating by this data sheet.
C. This data sheet regulates conditions and limitations of the airworthiness demands that the product, which has the qualified type certificate, should fulfill.
A. At the location shown in the figure, waterproof corrosion inhibiting compound has been used on certain aircraft construction. To keep the effectiveness of this protection, reapply the compound in these or other locations periodically.
B. Water displaying corrosion inhibiting compound has applied on certain airplanes structure in the locations in this figure. Periodic reapplication must be applied in these and other locations, so as to maintain effectiveness of this protection.
C. Water displacing anti-seize compound has been applied on certain airplanes construction in the locations in this figure. Periodic reapplication should be utilized in these and other locations, in order to keep effectiveness of the protection.
A. Licensed personnel appropriately finish the requirements of all other maintenance on airplane.
B. All other maintenance required on airplane should be done by the personnel who have the corresponding license.
C. All other maintenance requires that the properly licensed personnel should be on airplane.
A. Advisory circular must always be carried out on aircraft.
B. Advisory circular is the procedure that must be used when performing maintenance on an aircraft.
C. FAA provides advisory circular which is not always carried out on aircraft.
A. The function and operation of each unit in the system should be described. The location of the units shouldn’t be described.
B. The function, operation and location of each unit in the system should be deleted.
C. The function, operation and location of each unit in the system should be described.
A. Code is useless to identify the cables.
B. Put a code on the cables to identify them.
C. A tag should be attached to the cables.
A. The lean fuel flow mixtures will be provided by the EGT indicators under different engine powers.
B. EGT indicators constantly monitor the lean fuel flow mixtures wherever the thrust lever is.
C. The lean fuel flow mixtures are induced by the EGT indicators to various powerplants.
A. The routing of the cable loom may have been altered by the installation.
B. The routing of the cable loom may have been held by the installation.
C. The routing of the cable loom may have been defended by the installation.
A. Flash the screen with hot water.
B. Fresh the filter with hot water.
C. Rinse filter in hot running water.
