A、 Before restarting the engine, make sure to clear the ground from any fuel spills.
B、 Remove all spilled fuel from the ground before making the first attempt to start the engine.
C、 Ensure that no fuel on the ground is eliminated before proceeding with engine startup.
答案:A
A、 Before restarting the engine, make sure to clear the ground from any fuel spills.
B、 Remove all spilled fuel from the ground before making the first attempt to start the engine.
C、 Ensure that no fuel on the ground is eliminated before proceeding with engine startup.
答案:A
A. Make sure that the hydraulic oil can be cleaned.
B. Make sure that there is no dust in the hydraulic fluid.
C. Make sure that the hydraulic fluid is uncontaminated.
A. English is not often the mother language of the readers of technical files.
B. English is not often the private language of the readers of technical books.
C. English is not often the required language of the readers of technical pamphlet.
A. If the valve is the source of the fuel leak, discard the valve seals and install new ones.
B. If the fuel leaks out of the valve, reinstall the valve seals.
C. If the fuel leak flows towards the valve, discard the valve seals and install new ones.
A. When this material comes into contact with hot surfaces, it emits hazardous fumes.
B. Contact between hot surfaces and this material results in the release of harmful heat.
C. Dangerous fumes are consumed by this material upon contact with hot surfaces.
A. Each of the two life vests located at L2 entry door flight crew station is damaged.
B. Each of the two life vests located at L2 entry door flight crew station is out of time limit.
C. Each of the two life vests located at L2 entry door flight crew station is out of service.
A. Using a locally made tool to do the test is also accepted.
B. You can also make a local tool to do this test.
C. You can also make a tool to do this test locally.
A. Do not perform any work to the aircraft during maintenance.
B. It is forbidden to refuel the aircraft during maintenance.
C. You can add fuel to the aircraft at any time.
A. Print all pages besides wiring diagrams and foldouts on both sides.
B. Print all pages other than wiring diagrams and foldouts on both sides.
C. Print all pages no more than wiring diagrams and foldouts on both sides.
A. Make sure the wire in this position is able to unlock the parts.
B. The wire must be positioned so that the parts can oscillate freely.
C. Ensure the wire is positioned to create a locking motion on parts.
A. Sometimes you have to change long sentences to shorter ones, remove unnecessary information, or ask an engineer to get further explanation.
B. Some time you have to incorporate long sentences into shorter ones, decrease unnecessary information, or require an engineer for further instruction.
C. Sometime you must illuminate long sentences into shorter ones, ignore information which is not necessary, or order an engineer for further definition.