A、 The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shall also state precautions to be obeyed.
B、 The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shalln’t include precautions to be obeyed.
C、 The removal/installation portion shall hardly state the sequence of steps required to move and reinstall a component or unit. This portion shall also include precautions to be watched.
答案:A
A、 The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shall also state precautions to be obeyed.
B、 The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shalln’t include precautions to be obeyed.
C、 The removal/installation portion shall hardly state the sequence of steps required to move and reinstall a component or unit. This portion shall also include precautions to be watched.
答案:A
A. Use a degreasing agent to remove oil and grease.
B. Draw oil and grease from a degreasing agent.
C. Add oil and grease into a degreasing agent.
解析:这道题是关于使用去油脂剂清除油和油脂的方法。正确答案是A: 使用去油脂剂清除油和油脂。
解析:当我们需要清除表面上的油和油脂时,我们可以使用去油脂剂。这种去油脂剂可以有效地溶解油和油脂,使其容易被擦拭或清洗掉。因此,正确的做法是使用去油脂剂来清除油和油脂,而不是将油和油脂从去油脂剂中抽取出来,或者将油和油脂添加到去油脂剂中。
举个生动的例子,就好像你在厨房里做饭时不小心弄脏了炉灶上的油污,这时你可以使用去油脂剂来清洁。就像是在使用洗洁精清洗碗筷一样,去油脂剂可以帮助你轻松清除油污,让炉灶恢复干净亮丽的状态。
A. Data and parameters are gathered by three computers from the systems and put together on the data link to the display unit.
B. Data and parameters are generated by three computers in the system and are displayed on the display unit through the data link.
C. After analyzing the data and parameters from the system, three computers send the final result to the data link for display.
A. Using either method, the item to be checked is in the list of the desired condition.
B. Either way, check the listed item whose desired condition is stated.
C. No matter which method is used, the item to be checked is listed and its desired condition is presented.
A. Make sure the wire in this position is able to unlock the parts.
B. The wire must be positioned so that the parts can oscillate freely.
C. Ensure the wire is positioned to create a locking motion on parts.
A. The safety procedures are provided by the operators.
B. The safety procedures are provided to the manufacturers.
C. The safety procedures are provided by the manufacturers.
A. The repair limits are not permitted as special equipment is required.
B. The repair limits are not mentioned as special equipment is required.
C. The repair limits are not set as special equipment is required.
A. Choose the hydraulic system you will apply pressure.
B. Pressurize the selected hydraulic system.
C. Choose the hydraulic system you will depressurize.
A. Use of cabin pressurization during Takeoff, landing, or in flight shall be carefully restricted.
B. Use of cabin pressurization during Takeoff, landing, or in flight has limitations that shall be observed.
C. You shall follow the strict requirements when using cabin pressurization during Takeoff, landing, or in flight.
A. Without venting the IDG, the accuracy of your check will be affected.
B. Only if you reset the IDG, your check is effective.
C. The ventilation of the IDG accelerates your check.
A. The revision dates need to be displayed at each revision location.
B. The revision date needs to be displayed in an obvious place.
C. The revision date should be displayed on every revision page.