Revisions are to be made consistent with the format of the specification using the provisions of FAR 21.50 as a basis.

A. To know what you want to say and to use the words that give the wanted meaning shall always be assured.

B. In order to express the meaning that you want, always make sure that you know what you want to say and you use the words.

C. Always make sure that you use what you want to say to express the words with the meaning that you want.

A. Be careful when you put your hand onto printed circuit boards.

B. Be careful when you get close to printed circuit boards.

C. Be careful when you remove printed circuit boards.

A. The associated warning light should illuminate after 30 seconds.

B. The associated caution light should deactivate after a duration of 30 seconds.

C. The caution light, regardless of its position, should turn off within 30 seconds.

A. Flash the screen with hot water.

B. Fresh the filter with hot water.

C. Rinse filter in hot running water.

A. Independent, self-contained, gas reservoir assembly offers 7-9 seconds of pressure for operating after actuation.

B. Divided, self-contained, gas reservoir assembly stores the operating energy within 7-9 seconds prior actuation.

C. Single, self-contained, gas reservoir assembly provides the operating pressure within 7-9 seconds after actuation.

A. Print all pages besides wiring diagrams and foldouts on both sides.

B. Print all pages other than wiring diagrams and foldouts on both sides.

C. Print all pages no more than wiring diagrams and foldouts on both sides.

A. The lean fuel flow mixtures will be provided by the EGT indicators under different engine powers.

B. EGT indicators constantly monitor the lean fuel flow mixtures wherever the thrust lever is.

C. The lean fuel flow mixtures are induced by the EGT indicators to various powerplants.

A. Evaluate the impedance between the antenna baseplate and the airplane skin.

B. Record the measured resistance between the antenna baseplate and the airplane skin.

C. Perform the measurement of the resistance between the antenna baseplate and the airplane skin.

A. The values must be less than the approved differences.

B. The values must not exceed the allowable differences.

C. The values must be less than the allowable differences.

A. The function of the portable water system is to store and send drinking water to the passengers.

B. The potable water system must keep and transfer the water to the toilet for washing only.

C. The purpose of the drinking water system is to store and deliver the water for drinking.