Section 1 of the Pilot＇s Operating Handbook shall present basic data and information of general interest to the pilot which is useful in loading, sheltering, handling, and routine preflight checking of the airplane.

A. Explaining how to obtain the maximum ground miles per gallon through careful flight planning and attention to good operating procedures is the primary content.

B. Display how to achieve the main objective to get the greater ground miles per gallon by careful flight planning and attention to good operating procedures.

C. The principal purpose is to show how to increases the ground miles per gallon as much as possible with careful flight planning and attention to good operating procedures.

A. If abbreviations have special meanings, they may be used.

B. Abbreviations should not be used if they are universally meaningful.

C. Only use abbreviations whose meanings are generally recognized.

A. When fuel comes out, you should perpare for fire eliminating.

B. It is necessary to exterminate fire properly when fuel starts to leak.

C. Use a fire extinguisher immediately if there is fuel leakage.

A. The supplements of CAP are the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The CAP is the primary document containing the aircraft＇s continuous airworthiness procedures.

B. The airplane＇s maintenance manual (or Instructions for Continuing Airworthiness) serves as the main document that contains the procedures to ensure the continuing airworthiness of the airplane. CAP is a supplementation to the manual.

C. CAP supplements the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The supplements are the major document and involve in the procedures for the continuing airworthiness of the airplane.

A. Put the bell crank and shaft with identification to prevent improper installation.

B. Identify the bell crank and shaft with marks to prevent wrong installation.

C. Put the bell crank and shaft with identification to prevent wrong installation.

A. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive print leakage when printing on both sides.

B. Use good white paper with high strength quality and of adequate weight to delete excessive show-through when printed on both sides.

C. Use white paper with good strength and of sufficient weight and substance to prevent overmuch ink show-through the paper when printed on both sides.

A. During antenna installation, disregard the direction the alignment arrow is pointing.

B. Align the antenna in the opposite direction in consideration of the alignment arrow in installation.

C. When installing the antenna, make sure the alignment arrow is directed towards the front.

A. To know what you want to say and to use the words that give the wanted meaning shall always be assured.

B. In order to express the meaning that you want, always make sure that you know what you want to say and you use the words.

C. Always make sure that you use what you want to say to express the words with the meaning that you want.

A. Check all parts with clear defects in accordance with standard industry practices.

B. Check all parts for visible defects in accordance with standard industry practices.

C. Check all parts for serious defects in accordance with standard industry practices.

A. Keep the caps off the hoses.

B. Make sure the caps are off from the hoses.

C. Take the caps off the flexible pipe.