A、 For "emergency", the related failure should be responded immediately, for example, the total engine failure, fire or smoke, sudden cabin pressure lost.
B、 An "Emergency" almost including a serious failure that requires later response, such as a total engines failure, flame out or smoke, or rapid cabin pressurization.
C、 For "emergency", the related failure should be treated immediately, for example, the total engine is not malfunctioning, fire or smoke, sudden cabin pressure lost.
答案：A
A、 For "emergency", the related failure should be responded immediately, for example, the total engine failure, fire or smoke, sudden cabin pressure lost.
B、 An "Emergency" almost including a serious failure that requires later response, such as a total engines failure, flame out or smoke, or rapid cabin pressurization.
C、 For "emergency", the related failure should be treated immediately, for example, the total engine is not malfunctioning, fire or smoke, sudden cabin pressure lost.
答案：A
A. This Section shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook which consists of limitations.
B. This Section contains limitations which shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook.
C. The proper paragraph in Section 2 of the Handbook shall describe and cross-reference this Section included in this limitations.
A. It is forbidden to go into the engine test area with approval.
B. Entering the engine test area must not be approved.
C. Approval is a must when entering the engine test area.
解析：解析：这道题考察的是AM96转向架二系悬挂装置的功能。转向架二系悬挂装置是连接轮对轴箱装置和转向架的装置，它的主要作用是支撑和保护轮对轴箱，使其能够在行驶过程中平稳运转。因此，说法“AM96转向架二系悬挂装置就是连接轮对轴箱装置和转向架的装置”是错误的。
举个生动的例子来帮助理解：想象一辆火车在铁轨上行驶，每个轮子都有一个轴箱，而这些轴箱需要通过悬挂装置连接到转向架上。悬挂装置就像是轮子和转向架之间的桥梁，起到支撑和保护的作用，使火车能够平稳行驶。如果没有悬挂装置，轮子和转向架之间的连接将会出现问题，影响火车的运行安全和稳定性。
A. The revision dates need to be displayed at each revision location.
B. The revision date needs to be displayed in an obvious place.
C. The revision date should be displayed on every revision page.
A. Ignore the absence of contamination in the fuel sample and continue with the procedure.
B. Continue with the procedure if the fuel sample does not exhibit any contamination.
C. Proceed with the procedure regardless of any contamination found in the fuel sample.
A. When fuel comes out, you should perpare for fire eliminating.
B. It is necessary to exterminate fire properly when fuel starts to leak.
C. Use a fire extinguisher immediately if there is fuel leakage.
A. The SMYD1 will limit rudder movement when flaps are up if trailing edge flaps receive data from up limit switch of SMYD1 during yaw damping.
B. The SMYD1 will limit rudder movement after receiving data from up limit switch of trailing edge flaps during yaw damping when flaps are up.
C. The SMYD1 will limit yaw damping to reduce rudder movement when flaps are up If trailing edge flaps receive data from up limit switch of SMYD1.
A. The interval between checks is at least two minutes.
B. The lowest limit of checks is two minutes.
C. Between two checks, it needs two minutes.
A. If the valve is the source of the fuel leak, discard the valve seals and install new ones.
B. If the fuel leaks out of the valve, reinstall the valve seals.
C. If the fuel leak flows towards the valve, discard the valve seals and install new ones.
A. Move the IDG forward and outboard until it is away from the accessory gearbox, QAD ring and power plant.
B. Move the IDG towards the forward position until the input shaft is away from the accessary gearbox and QAD ring, then move the IDG towards outboard and free of the power plant.
C. After moving the IDG towards the forward position, then it is free of the accessary gearbox, QAD and the power plant.
A. Obtain approval from the design authority after making any changes to this repair procedure.
B. Prior to modifying this repair procedure, obtain the approval of the design authority.
C. Ensure that the design authority approves nonessential alterations made to this repair procedure.
