A、 An "Airplane Weighing Form" shall be included in each handbook and the form shall contain an airplane side view that shows the location of weighing points (using jacking points or landing gear) relative to the datum line.
B、 Each handbook shall provide an aircraft side view that is included in an "Airplane Weighing Form" to show the position of weighing points (using jacking points or landing gear) related to the datum line.
C、 An airplane three view that shows the weighing points ((using jacking points or undercarriage) relative to the datum line shall be excluded in an "Airplane Weighing Form" of each handbook.
答案：A
A、 An "Airplane Weighing Form" shall be included in each handbook and the form shall contain an airplane side view that shows the location of weighing points (using jacking points or landing gear) relative to the datum line.
B、 Each handbook shall provide an aircraft side view that is included in an "Airplane Weighing Form" to show the position of weighing points (using jacking points or landing gear) related to the datum line.
C、 An airplane three view that shows the weighing points ((using jacking points or undercarriage) relative to the datum line shall be excluded in an "Airplane Weighing Form" of each handbook.
答案：A
A. Use a drill bit not less than 45 mm long.
B. Use a drill bit that has a maximum length of 45 mm.
C. The drill bit used is more than 45 mm.
A. Each manufacturer is expected to reasonably abide by the Specification content and arrangement.
B. Each manufacturer is expected to reasonably agree with the Specification content and arrangement.
C. Each manufacturer is expected to reasonably substitute the Specification content and arrangement.
A. There is a hard landing on the broken nose landing gear.
B. The landing gear has affected hard landing.
C. The nose landing gear is broken because of hard landing.
A. The exit doors are mainly used for passenger boarding.
B. The exit doors are only used for evacuation.
C. The exit doors are not only used for the passengers to evacuate from the airplane but also used for normal exit.
A. Manufacturers would like to reserve and exercise the right to make reasonable judgments about the depth and scope of the contents of their publications.
B. Manufacturers are requested to reserve and exercise the right to judge contents of their publications of reasonable depth and scope.
C. Manufacturers are required to reserve the right of sound judgment on the contents of their publications by the bureau.
A. The valve has flaps shaped like a full circle.
B. The shape of the valve flaps is a half ring.
C. The valve flaps have a shape of half circle.
A. Pull out the circuit breaker.
B. Push in the circuit breaker.
C. Remove the circuit breaker.
解析：这道题是关于如何打开一个断路器的问题。在这种情况下，正确的答案是A:拉出断路器。当我们需要打开一个电路时，通常会拉出断路器，这样电路就会中断，电流就不会流通了。所以，选择A是正确的。
举个例子来帮助你更好地理解：想象一下，你的房间里有一个灯泡，但是你想要关掉它。这时，你可以想象灯泡所在的电路就像是这道题中的断路器。当你拉出断路器时，就好像是把灯泡的电路断开了，灯泡就会熄灭。所以，拉出断路器就是打开电路的正确方式。
A. After three full cycles, extend and retract the actuator.
B. You should extend and retract the actuator through three complete cycles.
C. Do nothing to the actuator after three complete cycles.
A. When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.
B. If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.
C. Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.
A. Words with lowercase letters are allowed in STE.
B. STE dictionary is permitted to use the UPPERCASE letter word.
C. In STE, a word in capital letters means that it is approved.
