A、 Worn components should be replaced even if the damage is below the maximum limits.
B、 Replace components that are worn beyond their maximum limits.
C、 The maximum limits can not be exceeded when repairing the worn components.
答案：B
A、 Worn components should be replaced even if the damage is below the maximum limits.
B、 Replace components that are worn beyond their maximum limits.
C、 The maximum limits can not be exceeded when repairing the worn components.
答案：B
A. This specification provides for the preparation and insurance of more complex manuals for less complex aircraft than aircraft operated by large scheduled airlines, while achieving industry-wide standardization of naming and formatting.
B. The specification is used to prepare and release simpler manuals for less complicated aircraft rather than the aircraft operated by large scheduled airlines while achieving industry-wide standardization of terminology and format.
C. This specification specifies the preparation and release of less complex manuals for aircraft that are less complex and operated by large scheduled airlines, and realizes the industry wide standardization of terms and formats.
A. Flash the screen with hot water.
B. Fresh the filter with hot water.
C. Rinse filter in hot running water.
A. Every model has this function.
B. This function is applicable to all models.
C. Not all models have this function.
A. Survey the opening for fractures that often avoid inspection.
B. Inspect the opening for cracks that originate from its corners.
C. Inspect the opening for blemish that often covers its corners.
A. According to Boeing Docs and associated ADs, changing the dimension of the thrust reverser upper locking actuator lock sensor target can result in slow detection of the failure or undetected failure.
B. Based on the Boeing Docs and the associated ADs, if the size of the thrust reverser upper locking actuator lock sensor target is increased, it may result in delayed or undetected the actuator failure.
C. As described in Boeing Docs and the associated ADs, if the orientation of the locking actuator on the thrust reverser locking sensor target changes, the actuator failure will be delayed or undetected.
A. The computer needs to be backup at each interval.
B. The backup of the computer is necessary.
C. Back up your computer regularly.
A. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive print leakage when printing on both sides.
B. Use good white paper with high strength quality and of adequate weight to delete excessive show-through when printed on both sides.
C. Use white paper with good strength and of sufficient weight and substance to prevent overmuch ink show-through the paper when printed on both sides.
A. The interval between checks is at least two minutes.
B. The lowest limit of checks is two minutes.
C. Between two checks, it needs two minutes.
A. This Specification is designed to provide guidance for the development of Handbooks for all types of general aviation airplanes. These airplanes are originally certificated at minimum takeoff weights of 12,500 pounds or more.
B. This specification is intended to provide guidance for the development of Handbooks for all types of general aviation aircraft, which are initially certificated at maximum takeoff weights of 12,500 pounds or less.
C. This specification is intended to provide guidance for the preparation of Handbooks. For all types of general aviation aircraft, their maximum take-off weight is more than 12,500 pounds.
A. When the indicator is visible, stop the pump.
B. When the indicator comes on , stop the pump.
C. Stop the pump unless the indicator comes into view.
