A、 Advanced Performance Charts
B、 esxcli
C、 resxtop
D、 Overview Performance Charts
E、 Esxtop
F、
G、
H、
I、
J、
答案:AE
解析:解析:Advanced Performance Charts and esxtop are both vSphere reporting tools that can be used to observe near real-time statistics for all VMs. Advanced Performance Charts provides a graphical view of performance data, while esxtop is a command-line tool that provides more detailed information.高级性能图表和esxtop都是vSphere报告工具,可用于观察所有虚拟机的近实时统计数据。高级性能图表提供了性能数据的图形视图,而esxtop是一个命令行工具,可提供更详细的信息。
A、 Advanced Performance Charts
B、 esxcli
C、 resxtop
D、 Overview Performance Charts
E、 Esxtop
F、
G、
H、
I、
J、
答案:AE
解析:解析:Advanced Performance Charts and esxtop are both vSphere reporting tools that can be used to observe near real-time statistics for all VMs. Advanced Performance Charts provides a graphical view of performance data, while esxtop is a command-line tool that provides more detailed information.高级性能图表和esxtop都是vSphere报告工具,可用于观察所有虚拟机的近实时统计数据。高级性能图表提供了性能数据的图形视图,而esxtop是一个命令行工具,可提供更详细的信息。
A. Set the value of the VMware ESXi Management Network VLAN ID to 10
B. Configure at least two network adapters for the VMware ESXi Management Network
C. Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address
D. Create a DNS A Record for the VMware ESXi host on the corporate DNS servers
E. Disable IPv6 for the VMware ESXi Management Network
F. Restore the original Management vSphere Standard Switch.
G. Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for ' names resolution
H.
I.
J.
解析:
A. Inflate the base disk to make space for future snapshots.
B. Revert to the latest snapshot.
C. Consolidate all of the snapshots into the base VM.
D. Identify and delete the largest delta .vmdk file.
E.
F.
G.
H.
I.
J.
解析:
A. Enable Distributed Power Management (DPM) and set the VM power state to the suspend to disk option
B. Enable Quick Boot and set the VM power state to the suspend to disk option
C. Enable vSphere High Availability (HA) admission control and set the VM power state to the suspend to memory option
D. Enable Quick Boot and set the VM power state to the suspend to memory option
E.
F.
G.
H.
I.
J.
解析:解析:https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-lifecycle-manager/GUID-06A5D316-9452-4A5D-A5 The administrator should enable Quick Boot and set the VM power state to the suspend to memory option, which will allow the administrator to reduce the downtime associated with the patching operation without migrating the VMs. Quick Boot is a feature that skips the hardware initialization phase during host reboot, which reduces the system boot time. Suspend to memory is an option that preserves the state of the VMs in the host memory and restores them from memory after the reboot, which minimizes the VM downtime. These two features work together to optimize the remediation process and speed up the patching operation. 管理员应启用快速启动,并将虚拟机电源状态设置为“挂起到内存”选项,这将允许管理员在不迁移虚拟机的情况下减少与修补操作相关的停机时间。快速启动是一项功能,它可以在主机重新启动期间跳过硬件初始化阶段,从而减少系统启动时间。“挂起到内存”选项可以保留主机内存中虚拟机的状态,并在重新启动后从内存中恢复它们,从而最大限度地减少虚拟机停机时间。这两项功能共同优化补救流程,加快修补操作。
A. 18
B. 80
C. 36
D. 120
E.
F.
G.
H.
I.
J.
解析:解析:The size of the Finance network resource pool should be 50 percent of the reserved bandwidth for VM traffic, which is 6 Gbps x 3 hosts = 18 Gbps.财务网络资源池的大小应为虚拟机流量预留带宽的50%,即6 Gbps x 3台主机= 18 Gbps。
A. Network latency must be less than 10 milliseconds
B. They must have a supported Wide Area Network (WAN).
C. They must have a minimum of a 10 Gbps network adapter
D. They must have a minimum of a 1 Gbps network adapter.
E. Network latency must be more than 10 milliseconds.
F.
G.
H.
I.
J.
解析:解析:When configuring vCenter High Availability (HA), two of the requirements for the active, passive, and witness nodes are that network latency must be less than 10 milliseconds, which ensures reliable communication between them; and they must have a minimum of a 1 Gbps network adapter, which provides sufficient bandwidth for data replication.在配置vCenter高可用性(HA)时,对主动、被动和见证节点的两个要求是网络延迟必须小于10毫秒,这可确保它们之间的可靠通信;他们必须至少有一个1 Gbps的网络适配器,为数据复制提供足够的带宽。
A. vSphere Distributed Resource Scheduler
B. Hybrid Linked Mode
C. vCenter Server High Availability
D. Enhanced Linked Mode
A. Ensure that each vCenter Server Appliance is configured to use a Network Time Protocol (NTP) source.
B. Ensure that each ESXi host is configured to use a Precision Time Protocol (PTP) source.
C. Ensure that each ESXi host is configured to use a Network Time Protocol (NTP) source.
D. Ensure that each vCenter Server Appliance is configured to use a Precision Time Protocol (PTP) source.
解析:解析: To comply with the policy of synchronizing time with an external source that is accurate to the microsecond, the administrator needs to ensure that each ESXi host is configured to use a PTP source, which provides higher accuracy than NTP.为了遵守与精确到微秒的外部源同步时间的策略,管理员需要确保每台ESXi主机都配置为使用PTP源,这比NTP提供了更高的精确度。
A. One Supervisor will be created in a specific zone.
B. One Supervisor will be created across all zones.
C. Three Supervisors will be created in Linked Mode.
D. Individual vSphere Namespaces will be placed into a specific zone.
E. Individual vSphere Namespaces will be spread across all zones.
F.
G.
H.
I.
J.
解析:解析: When mapping vSphere zones to vSphere clusters, one Supervisor will be created in each zone, and individual vSphere Namespaces will be placed into a specific zone based on their resource requirements and availability constraints.将vSphere分区映射到vSphere集群时,将在每个分区中创建一个Supervisor,并根据资源要求和可用性限制将各个vSphere命名空间放置到特定分区中。
A. Version Unsupported
B. Guest Managed
C. Unknown
D. Upgrade Available
E.
F.
G.
H.
I.
J.
解析:解析: If VMware Tools has a known problem, the tools status will be Version Unsupported如果VMware Tools存在已知问题,工具状态将是版本不受支持
A. Delete App-LibTemplate (2)
B. Revert to App-LibTernplate (2)
C. Delete App-LibTemplate (3)
D. Check out App-LibTemplate (3)
解析:解析: Deleting App-LibTemplate (3) will remove the changes that are no longer needed and revert to the previous version of the template.删除App-LibTemplate (3)将删除不再需要的更改,并恢复到模板的前一版本。