A、 如果跳开关拔出,则断开电路。
B、 如果跳开关闭合,则断开电路。
C、 如果跳开关拔出,则接通电路。
答案:A
A、 如果跳开关拔出,则断开电路。
B、 如果跳开关闭合,则断开电路。
C、 如果跳开关拔出,则接通电路。
答案:A
A. When the crossfeed system is open,it is possible for one fuel pump to supply fuel to the two engines.
B. When the supplying system is open,it is possible for one fuel pump to supply fuel to the two engines.
C. One fuel pump can supply fuel to two engines,as the supplying system is open.
A. If your decision is not to change the unit,monitor its temperature at least 15 rotations.
B. If you decide not to renew the unit,supervise its temperature at least 15 periods.
C. If your decision is not to replace the unit,monitor its temperature for a minimum of 15 cycles.
A. The reserved 45 minutes for use in aircraft cruising power shall be calculated.Chart should provide information of the calculation method for the reserve.
B. To reserve 45 minutes for the flight at cruising power is calculated.The calculation method of reserves should provide additional diagrams and related instructions.
C. Reserve shall be computed as 45 minutes at the cruise power to be used for the flight.The explanation information presented with the chart should explain how the reserve was computed.
A. 厨房指的是存放和准备食物和饮料的区域。如果可拆卸和固定的橱柜、烤箱、冰箱、垃圾箱、碗架、咖啡机是制造商指定的标准设备,则也属于厨房设备。
B. 厨房指的是存放和准备食物和饮料的区域。包括可拆卸和固定的橱柜、烤箱、冰箱、垃圾箱、碗架、咖啡机,并且这些设备是制造商指定的标准设备。
C. 厨房指的是存放和准备食物和饮料的区域。厨房内可拆卸和固定的橱柜、烤箱、冰箱、垃圾箱、碗架、咖啡机也是制造商指定的标准设备。
D. C.厨房指的是存放和准备食物和饮料的区域。厨房内可拆卸和固定的橱柜、烤箱、冰箱、垃圾箱、碗架、咖啡机也是制造商指定的标准设备。
A. Grind the surface with a soft cloth after it becomes light.
B. Rub the surface with a soft cloth when it becomes brightness.
C. Polish the surface with a soft cloth until it becomes shiny.
A. 扰流板的作用是使机翼上的阻力增加,升力减少,从而扰乱流经该机翼上表面的平滑气流。
B. 扰流板的作用是扰乱流经机翼上表面的平顺气流,从而使此机翼上的阻力增加,升力减少。
C. 扰流板的作用是增加机翼上的阻力,造成升力减少,进一步干扰流经该机翼上表面的光滑气流。
D. C.扰流板的作用是增加机翼上的阻力,造成升力减少,进一步干扰流经该机翼上表面的光
E. C.扰流板的作用是增加机翼上的阻力,造成升力减少,进一步干扰流经该机翼上表面的光滑气流。
A. 此门在飞行中部分打开,在地面时完全打开。
B. 此门在飞行中完全打开,在地面时完全打开。
C. 此门在飞行中部分打开,在地面时也部分打开。
A. 当表示章/系统的数字后面是 0,即表示章节/子系统和维修项目/组件的数字有 0,这部分就是适用于整个系统的。
B. 当表示章/系统的数字后面是 0,即表示节/子系统和维修项目/组件的数字是 0,这部分就是适用于整个系统的。
C. 当表示章/系统的数字后面是 0,即表示章/子系统或维修项目/组件的数字是 0,这部分就是适用于整个系统的。
D. B.当表示章/系统的数字后面是 0,即表示节/子系统和维修项目/组件的数字是 0,这部分就是适用于整个系统的。
E. C.当表示章/系统的数字后面是 0,即表示章/子系统或维修项目/组件的数字是 0,这部分
F. C.当表示章/系统的数字后面是 0,即表示章/子系统或维修项目/组件的数字是 0,这部分就是适用于整个系统的。
A. 位置发射机安装在 PCU 下部。
B. 位置发射机安装在 PCU 上方。
C. PCU 安装在位置传感器的上方。
A. This system is used to expand and return the landing gear.
B. This system is used to extend and retract the landing gear.
C. This system is used to extract and retract the landing gear.