85.Turn the knob to make the display go out of view.

A. Get approval for all modifications from the design authority.

B. The design department is irresponsible for approving the changes.

C. The arrangement has to be approved by the design department.

A. It is understood that compliance with the above can in some instances cause duplication of test procedures,which is acceptable.

B. It will lead to repeat the test process when you obey the regulations in some cases,it is barely to be accepted.

C. It is understood that follow the above regulations may cause repeating in the test procedures ,although it is allowable.

A. This Specification was issued by the General Aviation Manufacturers Association

B. This Specification was revised by the General Aviation Manufacturers Association

C. This Specification was compiled by the General Aviation Manufacturers Association

A. The operation procedure requires that the maintenance behavior be logically executable.

B. The logical maintenance steps or operating procedures constitute the maintenance procedures.

C. Break down maintenance activities into logical steps or operations as required by procedures.

A. If there is no approval of the FAA Oversight Office that manages the airplane model Type Certificate,anyone cannot change or delete these inspection features that are compulsive.

B. These inspection features can be changed or deleted if they don't get approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate because they are mandatory.

C. If changing or deleting of these inspection features is approved by the FAA Oversight Office that manages the airplane model Type Certificate,they are mandatory.

A. The engine-driven pump is the major pump that works endless when it is switched on.

B. The engine-driven pumps are the main pumps that runs continuously during operation.

C. The engine-driven pumps are the secondary pumps that operates infinitely after running.

A. 本段还应说明,除已明确的检查项目外,适航指令可能要求执行其他检查项目。

B. 本段还应说明,除已完成的检查项目外,还应完成哪些适航指令可能要求执行的其他检查项目。

C. 本段还应说明其他适航指令要求执行的固定检查项目和其他检查项目。

A. Rise the cylinder up its install position.

B. Lift the cylinder above its installed position.

C. Lift the bushings above its installing position.

A. 附件的信息可能会通过定期培训要求传达给所有员工。

B. 额外的信息可以通过定期培训要求传达给所有员工。

C. 增加的信息可以通过复训要求传达给现有员工。

A. 如果杆被意外移动,请跳过测试。

B. 如果手柄意外移动,再做一次测试。

C. 如果重新测试,确保手柄不会意外移动。