A、 调整加速度计的精度。
B、 准确调整陀螺仪。
C、 调整罗盘的精度。
答案:B
A、 调整加速度计的精度。
B、 准确调整陀螺仪。
C、 调整罗盘的精度。
答案:B
A. The fuselage is a semi-monocoque structure.
B. The fuselage is a demi-plate.
C. The airframe is of half-shell structure.
A. Clamps should be spaced at intervals not exceeding 24 inches.Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
B. Pins should be spaced at intervals not exceeding 24 inches.Pins on harness should be selected so that they have a snug fit without pinching wires.
C. Pins should be spaced at intervals not exceeding 24 inches.Pins on harness should be selected so that they have a snug fit without scratching wires.
A. 在两个垫圈之间安装间隔装置。
B. 在两个清洗器之间安装垫片。
C. 在两个垫圈之间安装垫片。
A. 涡轮间隙控制传感器提供高压涡轮的温度数据给 EEC。
B. 涡轮间隙控制传感器提供来自高压涡轮保护罩的 EEC 温度数据。
C. 涡轮间隙控制传感器提供高压涡轮保护罩的温度数据给 EEC。
A. If the passed or failed indication that shows on the MAT does not agree with the indication on the maintenance page,ignore the indication on the MAT.
B. If the pass or fail prompt displayed on MAT is inconsistency with the prompt on the maintenance page,please ignore the prompt on MAT.
C. Neglect the instruction on MAT,whether the passing or failure sign shown on the MAT or not.
A. The IDG drives a constant-speed unit and an oil cooled generator.
B. The IDG includes a variable-speed drive and an fuel cooled generator.
C. The IDG consists of a constant-speed drive and an oil cooled generator.
A. Depressurize the system to 150 bar with the handle pump.
B. Pressure the system to 150 bar with the hand actuator.
C. Pressurize the system to 150 bar with the hand pump.
A. When showing a low flow or not sufficient cooling condition,the low flow sensor produces an alarm signal of the flight compartment for warning.
B. When a low flow or under cooling condition occurs,the low flow sensor provides an alarm signal to the cabin compartment for alert.
C. When a low flow or not sufficient cooling condition occurs,the low flow sensor supplies an alarm signal to the flight compartment for annunciation.
A. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed,aircraft damaged,etc.neither short-term nor long-term.
B. Instructions required for parking or storing the aircraft under normal or abnormal conditions,such as engine removal,aircraft damage,etc.,which are used for short-term or long-term under extreme weather conditions.
C. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed,aircraft damaged,etc.either short-term or long-term.
A. Grind the surface with a soft cloth after it becomes light.
B. Rub the surface with a soft cloth when it becomes brightness.
C. Polish the surface with a soft cloth until it becomes shiny.