A、 2 毫米的价值是允许的。
B、 允许使用 2 毫米的价值。
C、 允许使用 2 毫米的值。
答案:C
A、 2 毫米的价值是允许的。
B、 允许使用 2 毫米的价值。
C、 允许使用 2 毫米的值。
答案:C
A. 饮用水/非饮用水系统包括洗手池、饮水机组件、水箱、阀门等(如适用)。
B. 洗涤子系统包括洗手池、马桶组件、水箱、阀门等(如适用)。
C. 水/废水子系统包括洗手池、卫生间组件、水箱、阀门等(如适用)。
A. Describe how to operate the safety belt and wire harnesses.
B. Tell the way to use the seat and shoulder belts.
C. The seat and shoulder harness should be used by the pilot.
A. If the airspeed values are necessary to more than one configuration,the more restrictive IAS shall be used.
B. Where the airspeed values may be applicable to more than one configuration,the more conservative IAS value shall be used.
C. The more accurate IAS value should be used where the airspeed values are mandatory to less than one configuration.
A. 注:在随后的测试中,当来自交输进口的燃油流量超过 5 毫升/分钟时,你将获得开启压力。
B. 注:在随后的测试中,当来自交输进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
C. 注:在随后的测试中,当来自横穿进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
D. C.注:在随后的测试中,当来自横穿进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
A. 滑油必须要分析。
B. 对滑油进行分析。
C. 已经分析了滑油。
A. Maximum Landing Weight is maximum weight supplied for the landing contact.
B. Minimum Landing Weight is minimum weight provided for the landing touchdown.
C. Maximum Landing Weight is maximum weight approved for the landing touchdown.
A. 适航部分必须设定一个更换周期、结构检查内容、和相关结构检查程序要求的型号认证。
B. 适航部分对型号认证需要的强制更换时限、结构检查周期、和相关结构检查程序要做出规定。
C. 适航章节必须规定每次强制实施的更换时间、结构检查间隔、以及型号认证所需的相关结构检查程序。
A. Interior Labels and Signs are required for interior general and emergency information,instructions,cautions,warnings,etc.
B. Interior Placards and Markings are required for interior general and emergency information,instructions,cautions,warnings,etc..
C. Interior Placards and Signs are required for interior general and emergency information,instructions,warnings,cautions,etc.
A. Depressurize the system to 150 bar with the handle pump.
B. Pressure the system to 150 bar with the hand actuator.
C. Pressurize the system to 150 bar with the hand pump.
A. 在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减震支柱充气或添加油液、润滑控制系统、饮用水系统消毒等。
B. 在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减震支柱充气或添加油液、为控制系统润滑、稳定便携式水系统等。
C. 在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减震支柱充气或添加油液、润滑控制系统、稳定饮用水系统等。
D. B.在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减震支柱充气或添加油液、为控制系统润滑、稳定便携式水系统等。
E. C.在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减
F. C.在航空器维修中,勤务指的是由于执行其他维护措施而需要进行的组件维护。包括给减震支柱充气或添加油液、润滑控制系统、稳定饮用水系统等。