A、 找到新的故障件。
B、 发现新的排故方法。
C、 找到新的排故程序。
答案:C
A、 找到新的故障件。
B、 发现新的排故方法。
C、 找到新的排故程序。
答案:C
A. Ensure that there is no corrosion on the tubes.
B. Make sure that the tubes have no deformation.
C. Make sure that the tubes have no crack.
A. Operation time should be recorded if the pump is in emergency .
B. When you use the emergency pump,record the time of operation.
C. When the pump is for emergency use,record the time of usage.
A. 飞行环境数据和皮托静压系统包括皮托管、静电管、气温、爬升速度、空速、高速警告、高度、高度报告、高度计校正系统等。
B. 飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升率、空速表、高速警告、高度、高度报告、高度表校正系统等。
C. 飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升速度、气流速度、高速警告、海拔、海拔报告、海拔计修改系统等。
D. B.飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升率、空速表、高速警告、高度、高度报告、高度表校正系统等。
E. C.飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升速度、气流速度、高速警告、海拔、海拔报告、海拔计修改系统等。
A. 确保厕所组件正确冲洗。
B. 确保厕所马桶正常工作。
C. 确保厨房组件正常工作。
A. During the retraction test,keep a close watch on the monitor.
B. Continuously observe the indications after the retraction test.
C. Monitor the indications during the retraction test.
A. When this material comes into contact with hot surfaces,it emits hazardous fumes.
B. Contact between hot surfaces and this material results in the release of harmful heat.
C. Dangerous fumes are consumed by this material upon contact with hot surfaces.
A. Any anomaly should be reported to ABC,through the Condition Reporting System,so that additions and/or revisions can be made to the CAP where deemed necessary.
B. Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.
C. ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.
A. 保证手柄和滚柱之间是干净的。
B. 确保杆和滚柱之间有连接。
C. 确保杆和滚轮之间有间隙。
A. Make sure that the cargo compartment pressure stays constant.
B. Make sure that there is pressure in the cabin.
C. Make sure that the cabin pressure stays constant.
A. If liquid spills in the kitchen,all traces of the liquid must be cleaned promptly and the concerned area must be completely dry.
B. If liquids are spilled inside the galley,you must remove all signs of liquid and fully dry the areas of contamination immediately.
C. If liquid spills in the galley,all marks of the liquid must be removed at once and the polluted area must be completely dried.