A、 下一个检查内容是基于本次检查结果。
B、 下一次检查间隔是基于本次检查结果。
C、 下一次检查重点是基于本次检查结果。
答案:B
A、 下一个检查内容是基于本次检查结果。
B、 下一次检查间隔是基于本次检查结果。
C、 下一次检查重点是基于本次检查结果。
答案:B
A. 描述飞机电源系统时,应提供相关限制、警告和操作提示。
B. 描述飞机电源系统时,应解释相关束缚、警示和操作提示。
C. 描述飞机电源系统时,应提供相关限制、警告和操作警示。
A. Ensure that you do activate the control adjacent to it.
B. Adjust the adjacent control for optimal results.
C. Make sure that you do not operate the adjacent control.
A. 当需要了解膜片时,使用箭头指示方向。
B. 必要时应使用箭头表示流向来理解原理图。
C. 利用箭头指示的方向来理解线路施工图。
A. Lubricate one side of the washers.
B. Lubricate one side of the seals.
C. Wash one side of the washers.
A. The localizer beam is aligned with the centerline of the runway.
B. The localizer way is misaligned with the centerline of the runway.
C. The localizer course is aligned with the centerline of the runway.
A. Airspeeds used in this Section shall be specified in Indicated Airspeed,assuming zero instrument error,in order to make the information as directly usable as possible.
B. This Section shall use Indicated Airspeed as Airspeed,i.e.the instrument is mostly accurate,so the information can be used directly.
C. Airspeed used in this Section shall be defined as Indicated Airspeed,that is,the instrument is almost right,so as to make the information possibly be used directly.
A. Many electrical power components are in the EE compartment.
B. Many electrical power components are in the cargo compartment.
C. Many electrical power components are in the APU compartment.
A. 控制水平安定面/前置平尾位置和移动的系统部分。
B. 控制垂直安定面/鸭翼位置和移动的系统部分。
C. 控制水平/前翼位置和移动的系统部分。
A. Use a hole instrument to examine the turbine internally.
B. Use a borescope to examine the combustor internally.
C. Use a hole instrument to examine the combustor externally.
A. Examine the area that is around the drain holes for signs of corrosion.
B. Check the scavenge hole and areas around it for corrosion.
C. Make sure that there's no corrosion around the drain hole.