A、 记录对蒙皮表面进行的所有修理。
B、 记录对蒙皮封严进行的所有修理。
C、 记录对蒙皮损伤进行的所有处理。
答案:A
A、 记录对蒙皮表面进行的所有修理。
B、 记录对蒙皮封严进行的所有修理。
C、 记录对蒙皮损伤进行的所有处理。
答案:A
A. 本段描述了不同飞行阶段重量和力矩的计算程序,以及确保重心处于经批准范围内的程序。
B. 本段描述了为计划飞行的各个阶段计算重量和力矩的程序,以此确保重心处于经批准的范围内。
C. 本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批准范围内的程序。
D. B.本段描述了为计划飞行的各个阶段计算重量和力矩的程序,以此确保重心处于经批准的范围内。
E. C.本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批
F. C.本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批准范围内的程序。
A. 铝制品力矩值可以适用于铝、钢、或钛材料的安装力矩。
B. 对于安装在铝凸台上的铝、钢或钛配件,使用铝配件扭矩值。
C. 铝质安装台使用的力矩值,在铝、钢铁或钛合金制品固定连接时都适用。
A. Failure of the air turbine starter can trigger the engine overheat and fire indications.
B. The air turbine starter fails to trigger the engine overheat and fire indications.
C. Failure of the air turbine starter can cause the engine overheat and fire indications.
A. 在初始蒙皮的初始紧固件位置,安装埋头铆钉。
B. 在初始蒙皮的初始紧固件位置,制作埋头垫圈。
C. 使埋头垫圈适用于初始蒙皮上的初始紧固件。
A. 确保区域测试没有人。
B. 确保测试区域没有人。
C. 确定任何人可以进入考试区域。
A. When you move the alternate nose wheel steering switch to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve moves the pressure source for the landing gear retraction and the nose wheel
B. When move the alternate switch to steer the nose wheel to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve moves the pressure source from hydraulic system A to hydraulic system B duri
C. When moving the alternate nose wheel steering switch to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve removes the pressure source from the landing gear retraction and the nose wheel.
A. Apparently,the Supplement about the subject system or equipment,if installed,must be in the Pilot's Operating Handbook whenever applicable.
B. You shall know clearly that when the subject system or equipment is installed,the Pilot's Operating Handbook must always contain the related Supplement.
C. When the subject system or equipment is installed,you need to clearly identify the associated Supplement in the Pilot's Operating Handbook at all times.
A. Airline performance data shall be presented in either graphical or tabular formats.
B. Airplane performance data shall be presented in either graphical or tabular formats.
C. Airplane restriction data shall be presented in either graphical or tabular shapes.
A. Use a drill bit not less than 45 mm long.
B. Use a drill bit that has a maximum length of 45 mm.
C. The drill bit used is more than 45 mm.
A. The valve has flaps shaped like a full circle.
B. The shape of the valve flaps is a half ring.
C. The valve flaps have a shape of half circle.