511.Put the fairing in position.

A. A pilot with certification authorized by Part 43 of the regulation can perform limited preventive maintenance.

B. According to Part 43 of the regulation,Apilot is certificated to perform limited preventative maintenance.

C. A certificated pilot is authorized by Part 43 of the regulation to perform limited preventivemaintenance.

D. C.A certificated pilot is authorized by Part 43 of the regulation to perform limited preventivemaintenance.

A. Adjust the longitudinal trim system.

B. Adjust the lateral trim system.

C. Adjust the vertical balancing system.

A. The mechanic removed the cable roller and examined the surrounded area in detail.No other defects were found.

B. The mechanic removes the cable rotor and examines the adjacent area in detail.No other defects are noted.

C. The mechanic removed pulley and inspected the surrounding area in detail with no other defects found.

A. 这一系统部分包括控制手柄、钢索、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。

B. 这一系统部分包括控制手柄、电线、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。

C. 这一系统部分包括控制杆、电缆、作动筒、告警系统、连动装置、操纵面、位置指示灯等部件。

A. 对涡轮发动机来说,排气系统包括发动机本体以外的部件。

B. 对涡轮发动机来说,排气系统包括发动机主系统内的装置。

C. 对涡轮发动机来说,排气系统不包括发动机主系统以外的装置。

A. The form of the climb performance presentation is decided by the airplane manufacturer.

B. The format of the cruise performance presentation is at the discretion of the airplane manufacturer.

C. The form of the cruise performance presentation is at the discretion of the airplane manufacturer.

A. An aircraft must comply with all the Airworthiness Standards and special conditions applicable to it,otherwise,a Type Certificate can not be issued for that aircraft.

B. A Type Certificate will not be issued for the aircraft if that aircraft meets all the requirements of Airworthiness Standards and special conditions which are applicable to it.

C. The aircraft will get a Supplemental Type Certificate only if the aircraft accords with all the applicable Airworthiness Standards and special conditions.

A. Make sure that the pressure in the cabin is almost zero.

B. Verify that the cabin pressure is not above zero.

C. Ensure that the pressure in the cabin is completely zero.

A. Install the point tags on the negative overheat thermocouple of the turbine.

B. Install the terminal tags on the forward overheat thermocouple of the turbine.

C. Install the port tags on the rearward overheat thermocouple of the turbine.

A. 在维护和修理期间支撑飞机所需的说明,包括支撑材料和设备、外形尺寸、支撑位置等信息。

B. 这些必要的说明是支撑飞机维修和修理期间使用的,包括顶升材料和设备,大概尺寸,顶升位置等信息。

C. 在维护和修理期间支撑飞机所需的文件,包括支撑材料和设备、大概尺寸、支撑位置等信息。

D. C.在维护和修理期间支撑飞机所需的文件,包括支撑材料和设备、大概尺寸、支撑位置等信息。