A、 压力波动和震动会导致软管磨损。
B、 压力堵塞和摆动可以造成软管老化。
C、 压力骤然上升和晃动会使软管分层。
答案:A
A、 压力波动和震动会导致软管磨损。
B、 压力堵塞和摆动可以造成软管老化。
C、 压力骤然上升和晃动会使软管分层。
答案:A
A. Explain how to check them for proper operation and how to recognize a malfunction.
B. Describes how to check that they are functioning properly to identify faults.
C. Describes how to identify these failures so that these systems can function properly.
A. Be careful not to get acid on your skin.
B. Prohibit not to get acid on your skin.
C. Be careful not to get alcohol on your skin.
A. Do not install 0.1 mm thick shims.
B. Do not install shims which are more than 0.1 deep.
C. Do not install shims that are more than 0.1 mm thick.
A. 本段描述了不同飞行阶段重量和力矩的计算程序,以及确保重心处于经批准范围内的程序。
B. 本段描述了为计划飞行的各个阶段计算重量和力矩的程序,以此确保重心处于经批准的范围内。
C. 本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批准范围内的程序。
D. B.本段描述了为计划飞行的各个阶段计算重量和力矩的程序,以此确保重心处于经批准的范围内。
E. C.本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批
F. C.本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批准范围内的程序。
A. 改变面板的位置。
B. 将面板移动到位。
C. 将脚蹬移动到位。
A. The data of the revision shall be shown on each printed page.
B. The date of the revision shall be shown on each revised page.
C. The time of the reserve shall be shown on each revised page.
A. On the label,read the date of the last inspection.
B. Check the date of latest inspection on the log.
C. On the label,make sure the date of last check.
A. 此章节包括了激励、传感、计算、增益、控制、作动和警告装置。
B. 此章节包括了接通、感应、计算、放大、控制、作动和警告装置。
C. 此章节包括了啮合、感受、计算、反馈、控制、作动和警告装置。
A. Rapidly and fully retract Ram Air Turbine and make sure that it doesn't attach to other parts.
B. Slowly and fully extend Ram Air Turbine and make sure that it doesn't touch other parts.
C. Make sure that the Ram Air Turbine is completely opened and it doesn't touch the other unit.
A. 描述飞机发动机时,应描述有关发动机仪表的以下信息:仪表操作方法读数极限值和典型正常值(如适用)。"
B. 描述飞机发动机时,应描述发动机仪表有关:操作方法读数限制和典型值(如适用)。"
C. 描述飞机发动机时,应描述一下发动机仪表:操作方法限制读数以及典型值(如适用)。
D. B.描述飞机发动机时,应描述发动机仪表有关:操作方法
E. B.描述飞机发动机时,应描述发动机仪表有关:操作方法读数限制和典型值(如适用)。"
F. C.描述飞机发动机时,应描述一下发动机仪表:
G. C.描述飞机发动机时,应描述一下发动机仪表:操作方法
H. C.描述飞机发动机时,应描述一下发动机仪表:操作方法限制读数以及典型值(如适用)。