A、 如果最初的设置已更正,将在 CDU 显示器上显示“自动测试完成”。
B、 如果初始化设置正确,将在 CDU 显示屏上显示“自动测试进行中”。
C、 如果“自动测试正在进行”显示在 CDU 显示屏上则表明初始化设置正确。
答案：B
A、 如果最初的设置已更正,将在 CDU 显示器上显示“自动测试完成”。
B、 如果初始化设置正确,将在 CDU 显示屏上显示“自动测试进行中”。
C、 如果“自动测试正在进行”显示在 CDU 显示屏上则表明初始化设置正确。
答案：B
A. 生产商编写的维修手册必须参考本规范中包含的所有材料的格式、字体和展示方法。
B. 本手册中包含的规范可以指导厂家编写维修手册,包括所有规章书写格式和展示方法。
C. 本规范中包含的规则应作为制造商编写的维修手册中包含的所有材料的格式、样式和展示方法的指南。
D. C.本规范中包含的规则应作为制造商编写的维修手册中包含的所有材料的格式、样式和展示方法的指南。
A. The arid welding coat may be polished with thin abrasive paper to hold a smoother layer.
B. The waterless painting coat may be worn with precise abrasive paper for a smoother surface.
C. The dried spray coat may be sanded with fine sandpaper to obtain a smoother finish.
A. 分配系统是指系统中用于将高压或低压空气分配到用户系统的那部分。
B. 分布系统是指系统中用于向正在运行中的系统分配高压或低压空气的那部分。
C. 配电系统是指系统中用于将高压或低压空气分配到有需求系统的那部分。
A. The complexity and stringency of this test or check are different from the operation conditions of the unit.
B. The test or check will change in complexity and stringency no matter what the conditions under which the unit operates.
C. Such tests or checks will vary in complexity and stringency according to the conditions under which the unit functions.
A. The tune time for a frequency not in memory is 2 to 4 seconds typical,7 seconds maximum.
B. The adjust time for a frequency not in memory is 2 to 4 seconds typical,7 seconds maximum.
C. The tune time for a frequency not in memory is 2 to 4 seconds common,7 seconds maximum.
A. You need to open the cargo door when the windspeed exceeds 30 knots.
B. Wait for the wind speed to increase to over 30 knots before opening the cargo door.
C. You are allowed to open the cargo door when the wind speed reduces to less than 30 knots.
A. The work must be completed according to the boss instructions.
B. The work must be done in compliance with the instructions in the Maintenance Manual.
C. The work must be done according to the Maintenance Manual ahead of time.
A. Failure of the air turbine starter can trigger the engine overheat and fire indications.
B. The air turbine starter fails to trigger the engine overheat and fire indications.
C. Failure of the air turbine starter can cause the engine overheat and fire indications.
A. 在最宽处测量裂纹的宽度。
B. 在最宽处测量凹坑的宽度。
C. 在最宽处测量刮痕的宽度。
A. The System/Chapter,sub-System/Section and Subject Number,the page number and date of issue will disappear in the lower left-hand corner, on the left-hand pages and the review date in the lower right-hand corner.
B. The System/Chapter,sub-System/Section andSubject Number,the pagenumberand dateofissue will appear in the lowerleft-handcorner,ontheleft-hand pagesandthe reviewdate inthelowerright-handcorner.
C. The System/Chapter,sub-System/Section andSubject Number,the pagenumberand dateofpublicwillappearinthe lowerleft-handcorner,ontheleft-hand pagesandtherevision dateinthelowerright-handcorner.
