A、 将电缆折成相等长度的三段。
B、 将电缆剪成相等厚度的三段。
C、 把电缆剪成长度相等的三段。
答案:C
A、 将电缆折成相等长度的三段。
B、 将电缆剪成相等厚度的三段。
C、 把电缆剪成长度相等的三段。
答案:C
A. Remove the 3 screws from the flap of the motor assembly.
B. Remove the 3 nuts from the flange of the motor assembly.
C. Remove the 3 screws from the flange of the motor assembly.
A. The operation of new generation aircraft has adopted the operation method of damage tolerance.
B. The damage tolerance design method is applicable to the new type aircraft.
C. The design concept of damage tolerance was successfully applied to the design of new generation aircraft.
A. Use the tube if it's worked into 3.3 feet long.
B. Use a tube whose length is 3.3 feet.
C. The tube which is used is 3.3 feet length.
A. 拆卸较大的螺帽。
B. 安装较大的螺栓。
C. 组装较大的螺钉。
A. Apply fuel to the steel surfaces.
B. Apply oil to the alloy surfaces.
C. Apply oil to the steel surfaces.
A. 一切排故和测试活动都要用中央维护计算机。
B. 中央维护计算机的一切排故和测试项目都被应用。
C. 中央维护计算机被用来进行所有的排故和测试活动。
A. If the drain hole is blocked,clean it.
B. If the drain hole is leaked,clean it.
C. If the drain hole is locked,clean it.
A. 不要超过这个速度或马赫数,但当空气平稳时仅仅小心操作就足够了。
B. 除非在平稳的空气中谨慎操作,否则不得超过此速度或马赫数。
C. 不要超过这个马赫数的速度,除非接受警戒只在平稳的空气中操作。
A. The toxic conditions are given in Paragraph 2.0.
B. All the test result are given in Paragraph 2.0.
C. All the test conditions are given in Paragraph 2.0.
A. Please stand near the moving surfaces.
B. Never stay near the removed surfaces.
C. Do not stay near the moving surfaces.