A、 Use a filter to remove unwanted material from the oil.
B、 Use a valve to remove unwanted material from the gas.
C、 Use a filter to remove unwanted material from the fluid.
答案:A
A、 Use a filter to remove unwanted material from the oil.
B、 Use a valve to remove unwanted material from the gas.
C、 Use a filter to remove unwanted material from the fluid.
答案:A
A. 应包括电路、系统、装置等的限动/解除限动程序。
B. 应包括电路、系统、单位等的钝化/再激活处理。
C. 应包括圆形、系统、装置等的惰性化/再生程序。
A. A reporting system,conherent with the system applied by the ABC Service Organization,has been established and included in this document.
B. A reporting system,compliance with the system used by the ABC Service Organization,has been established and comprised of this document.
C. A reporting system,constituent with the system employed by the ABC Service Organization,has been established and accomplished in this document.
A. 控制升降舵/副翼和配平片位置和移动的系统部分。
B. 控制升降舵/升降翼和调整片位置和运动的系统部分。
C. 控制升降舵/升降副翼和配平片位置和移动的系统部分。
A. 为了简化阅读和相互援引,插图、图形和表格应尽可能以纵向排列布局呈现。
B. 为方便阅读和相互参照,如可行,插图、图形和表格应垂直排列布局。
C. 为了精简阅读和交叉索引,插图、图标和表格如可行,应纵向排列布局。
A. Spoilers are used to increase the drag of the aircraft in flight,or to interrupt lift during landing and during rejected take-off.
B. Spoilers are used to enhance aircraft resistance in flight or to disrupt boost during landing and when take-off is canceled.
C. Spoilers are used to increase the aircraft drag in flight,or destroy the lift during landing and in case of aborted take-off.
A. The component was damaged badly,the repairing cost is over 60% of the total price.The workshop suggests reporting as an unserviceable part.
B. The component was damaged heavily; the repairing cost is over 60% of the total price.The workshop suggests scrapping.
C. The component was destroyed heavily; the repairing cost is60% of the total price.The workshop suggests segregation.
A. Obey the procedure if there is no debris in the oil sample.
B. If the fuel is not polluted,go on with the procedure.
C. If there is no contamination in the fuel sample,continue the procedure.
A. 飞机的维护信息必须与制造商提供的最近信息一致。
B. 飞机可根据制造商发布的最新信息进行维修。
C. 根据厂家最近出版的维修信息对飞机进行修理。
A. 为了减少分配误差,推荐使用该方法,同时将系统和设备的功能特性告知所有者。
B. 为使辨别时产生的误差最小化,推荐使用该方法,同时对所有者说明系统和设备的使用方式。
C. 建议采用该方法,以最大程度地减少分配出错,同时使所有者获知系统和设备的可用性。
A. 垂直安定面上翼肋改装
B. 垂直安定面翼尖翼梁改装
C. 垂直安定面翼尖缘条改装