655.手册应易于修订。

A. Sometimes,FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.

B. Sometimes,we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.

C. Sometimes,during preparing a Continuing Airworthiness Program,using the Specification may be accepted by FAA and other airworthiness authority.

A. This organization was asked to look into the readability of maintenance documentation in the civil aviation industry and find a resolution to simplify the language used to write such documentation.

B. This organization was asked to research the legibility of maintenance documentation in the civil aviation industry and get a way to simplify the language used to write such documentation.

C. This organization was asked to study the readability of maintenance documentation in the civil aviation industry and find a method to single out the language used to write such documentation.

A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.

B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.

C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.

D. C.Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.

A. The vendor can build programs to supply response to worthless conditions found in compliance with regulations.

B. The manufacturer may establish procedures to provide feedback on unairworthy conditions that were discovered when complying.

C. The manufacturer may create a process to give feedback on abnormal conditions when it's conformed.

A. 记录对蒙皮表面进行的所有修理。

B. 记录对蒙皮封严进行的所有修理。

C. 记录对蒙皮损伤进行的所有处理。

A. 用螺母将面板固定在支架上。

B. 用螺栓将面板固定在结构上。

C. 用螺栓将面板固定在支架上。

A. The accuracy of the adjustment can vary.

B. The accuracy of the adjustment can be fixed.

C. The precision of the adjustment can be prevented .

A. There are three jacks onboard the fuselage.

B. There are three jacking adapters on the fuselage.

C. There are three jacking points on the fuselage.

A. If you want to use the STE specification properly,a high professional standard is required.

B. A high level of professionalism requires the correct use of STE specifications.

C. In order to use the STE specifications appropriately,high professionalism is needed.

A. 真空子系统是指用于产生、输送和调节高于大气压的空气的装置和部件,包括泵、调节器、管线等,该子系统还包括歧管。

B. 真空子系统是指用于产生、输送和调节低于大气压的空气的装置和部件,包括泵、调节器、管线等,但该子系统并不通过和包括歧管。

C. 真空子系统是指用于产生、输送和调节低于大气压的空气的组件和部件,包括泵、调节器、管线等以及总管和流经总管的部件。

D. B.真空子系统是指用于产生、输送和调节低于大气压的空气的装置和部件,包括泵、调节器、管线等,但该子系统并不通过和包括歧管。

E. C.真空子系统是指用于产生、输送和调节低于大气压的空气的组件和部件,包括泵、调节

F. C.真空子系统是指用于产生、输送和调节低于大气压的空气的组件和部件,包括泵、调节器、管线等以及总管和流经总管的部件。