A、 Landing gear position has no effect on stall speeds.
B、 The position of the landing gear doesn't influence the surging speed.
C、 The idle speed is not effected by the landing gear position.
答案：A
A、 Landing gear position has no effect on stall speeds.
B、 The position of the landing gear doesn't influence the surging speed.
C、 The idle speed is not effected by the landing gear position.
答案：A
A. 该限制应在飞机处于起落架上或提升装置上时使用。
B. 如果飞机在起落架上或被顶起,请查阅此文件。
C. 该限制适用于飞机在起落架上或千斤顶上。
A. A maximum distance of 50 feet is required between consumable materials and the work area.
B. Keep flammable materials at a minimum distance of 50 feet from the work area.
C. Explosive materials must be kept at least 50 feet away from the work area.
A. Use the specified one if theequivalent material is not available.
B. Use the available equivalent one if no material is specified.
C. If you can not get the specified material,use an equivalent.
A. 安装时非必要不要拉伸封严。
B. 不要过度拉伸已安装的必要封严。
C. 在安装封严件时不要过度拉伸。
A. If the passed or failed indication that shows on the MAT does not agree with the indication on the maintenance page,ignore the indication on the MAT.
B. If the pass or fail prompt displayed on MAT is inconsistency with the prompt on the maintenance page,please ignore the prompt on MAT.
C. Neglect the instruction on MAT,whether the passing or failure sign shown on the MAT or not.
A. Airspeed values shall be expressed in knots.
B. Airspeed values shall be expressed in nautical miles.
C. Airspeed values shall be expressed in lbs.
A. 飞行控制系统指能够实现手动操纵飞机飞行姿态特性的部件和组件,包括液压增压系统、方向舵脚踏板、驾驶杆、控制钢索、调整片控制装置、安装支架等。
B. 飞行控制系统指控制飞机飞行姿态特性的手动部件和组件,包括液压增压系统、方向舵踏板、控制杆联接、控制电缆、襟翼控制、安装支架等。
C. 飞行控制系统指能够控制飞机飞行高度特性的手段,包括液压增压系统、舵踏板、控制杆联接、控制钢索、襟翼控制、安装支架等。
D. B.飞行控制系统指控制飞机飞行姿态特性的手动部件和组件,包括液压增压系统、方向舵踏板、控制杆联接、控制电缆、襟翼控制、安装支架等。
E. C.飞行控制系统指能够控制飞机飞行高度特性的手段,包括液压增压系统、舵踏板、控制杆联接、控制钢索、襟翼控制、安装支架等。
A. Extend the nose landing gear.
B. Extend the main landing gear.
C. Retract the main landing gear.
A. If a supply shutoff valve was closed within five minutes,no maintenance performance is needed and shutoff periods are not accumulated.
B. Maintenance action is not necessary and shutoff periods are not calculated unless the shutoff valve was closed for less than five minutes.
C. When a supply shutoff valve was closed for five minutes,maintenance action is hardly requiredand shutoff duration are not included.
D. C.When a supply shutoff valve was closed for five minutes,maintenance action is hardly requiredand shutoff duration are not included.
A. Get the approval of the design authority,whatever it is necessary to change the repair scheme.
B. Change the repair scheme,until getting the approval of the design authority.
C. If it is necessary to change the repair scheme,get the approval of the design authority.
