A、 It is not permit to work with any uncontrolled technical document for maintenance work.
B、 It is not permitted to work with any uncontrolled technical document for maintenance work.
C、 It is not allowed to work with anyunreliable technical documentfor maintenance work.
答案:B
A、 It is not permit to work with any uncontrolled technical document for maintenance work.
B、 It is not permitted to work with any uncontrolled technical document for maintenance work.
C、 It is not allowed to work with anyunreliable technical documentfor maintenance work.
答案:B
A. 检查吊架是否有裂纹、损伤,检查连接点有无磨损区域。
B. 检查吊架结构是否有裂痕、损伤和磨损区域。
C. 检查吊架连接点是否有裂纹、损伤和磨损区域。
A. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机对准着陆跑道所做的机动动作。在塔台管制机场,必须得到空中交通管制许可,并且建立了机场目视参照后才能做此机动。
B. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机对准着陆跑道所做的机动动作。在塔台管制机场,必须得到空中交通管制的间隔,并且建立了机场目视参照后才能做此机动。
C. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机能在着陆场矫正所做的机动动作。在塔台管制机场,必须得到空中交通管制的间隔,并且建立了机场目视参照后才能做此机动。
A. 拧松气阀螺母一两圈,慢慢释放气压。通过反转减震支柱或拆除单向活门排放液压油。
B. 拧松气阀螺母一两圈释放气压。排放减震柱液压油可以通过拆除单向活门进行。
C. 拧松气阀螺母一两圈缓慢释放液压。液力油排放从减震柱或单向活门处进行。
A. 冷却组件用来冷却风扇管道中的空气。
B. 点火组件是由来自风扇涵道的空气进行冷却的。
C. 加热组件是在风扇涵道的空气里进行冷却的。
A. 涡轮发动机速度表通常以涡轮最大转速的百分比来测量转速。
B. 涡轮发动机转速表通常以涡轮额定最大转速的百分比来测量转速。
C. 涡轮发动机速度计通常以涡轮转动的最大速度的百分比来衡量。
A. Explain check them whether normal or not,and how to identify a fault.
B. Make clear that if they operate properly and how to isolate the malfunction.
C. Explain how to check them for proper operation and how to recognize a malfunction.
A. 所有补充项目都可以发给手册中包含的全部飞机型号的所有者。
B. 所有附录都可以发给涵盖在手册中的所有型号飞机的所有持有者。
C. 所有补充材料都可以发给手册所涵盖的飞机机型的全部所有者。
A. Starting system refers to those units,components and associated systems used for igniting the engine.
B. Starting system refers to those units,components and associated systems used for idling the engine.
C. Starting system refers to those units,components and associated systems used for starting the engine.
A. Lubricate the engine and its accessories with the same brand.
B. Lubricants for the engine and the auxiliary equipment are the same.
C. The engine and the additional devices are greased in a same manner.
A. 显示连接点的位置,转弯半径的图解应包括在内。
B. 附着点的位置和转弯半径应包括插图。
C. 插图显示连接点的位置还包括转弯半径。