A、 Clean window using much quantities of soap and water.
B、 Clean window using liberal quantities of soap and water.
C、 Clean window with large quantities of soap and water.
答案:C
A、 Clean window using much quantities of soap and water.
B、 Clean window using liberal quantities of soap and water.
C、 Clean window with large quantities of soap and water.
答案:C
A. 如果能简化、缩短文本或能使文本更容易理解,则应使用插图。
B. 应该使用插图,因为插图可以简化、缩短文本,并使文本更易理解。
C. 如果文本复杂、冗长或不易于理解,则应进行解释说明。
A. Ensure that the porosity is less than the specified error.
B. Ensure that the depth of the hole conforms to the specified value.
C. Make sure that the diameter of the hole is less than the specified value.
A. The swivel nuts on both valves engage threads on an internal stem that loosens or draws tight the valve stem to a metal seat.
B. The rotating nuts on both valves are meshed with the threads on the inner valve stud,so that the valve stud is loosened or tightened to a metal valve base.
C. The swing nuts on both valves engage with the threads on the internal spool,allowing the spool to loosen or tighten to the metal seat.
A. 就防冰或除冰系统对飞机在已知结冰条件下的运行批准的影响,应在“补充程序”中的限制部分里予以明确。
B. “补充程序”的极限章节应明确规定,在已知结冰条件下运行必须确保防冰或除冰系统正常工作。
C. 防霜或除霜系统对在已知结冰条件下操作飞机的批准的影响应在“补充程序”的限制章节中明确规定。
D. C.防霜或除霜系统对在已知结冰条件下操作飞机的批准的影响应在“补充程序”的限制章节中明确规定。
A. Ensure that the parts bond correctly by applying pressure on the base of the patch.
B. Apply weight to the patch surface to ensure a correct bond between the parts.
C. Do not put pressure on the surface of the patch,as it is unnecessary for proper bonding.
A. 两个半圆形的挡板控制空气流。
B. 两个半导体的金属圈控制空气流。
C. 两个半圆形的金属圈控制空气流。
A. 根据部件制造商提供的数据,对本章中任意或全部部件的大修必须在经批准的车间内进行。
B. 对本章中任何部件或所有部件进行的翻修必须依据部件制造商提供的数据在有资质的车间内完成。
C. 根据部件制造商提供的数据,在合格的车间内对任意或所有部件进行的大修必须包含在本章节。
D. B.对本章中任何部件或所有部件进行的翻修必须依据部件制造商提供的数据在有资质的车间内完成。
E. C.根据部件制造商提供的数据,在合格的车间内对任意或所有部件进行的大修必须包含在
F. C.根据部件制造商提供的数据,在合格的车间内对任意或所有部件进行的大修必须包含在本章节。
A. 原理图的使用者是维修人员。
B. 工作图纸的使用者是维修人员。
C. 原理图用于机械专业。
A. 系统的这个部分用来显示数量、温度和液压油的压力,包括的项目有传输机、指示器和告警系统等。
B. 用来显示液压油的质量,温度和压力的系统部分,包括转换器、指示器和告警系统等元件。
C. 系统中用来指示液压油的油量、温度和压力的部分,包括传感器、指示器和告警系统等组件。
D. C.系统中用来指示液压油的油量、温度和压力的部分,包括传感器、指示器和告警系统等组件。
A. 不要改变路线的管道。
B. 不要改变管道的长度。
C. 不要改变管道的走向。