A、 If the cable twists,disconnect the two connectors.
B、 If the wire bents,break the two connectors.
C、 If the cable wire breaks,disconnect both ends of the connectors.
答案:A
A、 If the cable twists,disconnect the two connectors.
B、 If the wire bents,break the two connectors.
C、 If the cable wire breaks,disconnect both ends of the connectors.
答案:A
A. 为了减少分配误差,推荐使用该方法,同时将系统和设备的功能特性告知所有者。
B. 为使辨别时产生的误差最小化,推荐使用该方法,同时对所有者说明系统和设备的使用方式。
C. 建议采用该方法,以最大程度地减少分配出错,同时使所有者获知系统和设备的可用性。
A. Modifications,additions and omissions,a black line should be drawn vertically at the footer outside of the page parallel to the part of the change.
B. Revisions,additions and deletions shall be identified by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.
C. Alterations,substitutions and eliminates should be marked with a black slash outside the scope of the page to coincide with the section being changed.
A. If the pressure decreases quickly,the shear pins in the latch will break.
B. If the pressure reduces gradually,the shear pins in the lock will break.
C. If the pressure drops radically,the alignment pin in the lock will damages.
A. 本程序给出了用于水管临时修理的两种方法。
B. 本程序给出了水管的永久修理方法。
C. 本程序详细阐述了两种方法来解决水管的修理。
A. The revision dates need to be displayed at each revision location.
B. The revision date needs to be displayed in an obvious place.
C. The revision date should be displayed on every revision page.
A. 在本构型中,必须执行不同的测试程序。
B. 在本构型中,可以选用不同的测试程序。
C. 本次会议强制要求使用不同的测试程序。
A. The needle moves horizontally along the gage.
B. The pointer moves vertically along the scale.
C. The indicator moves longitudinally along the edge.
A. The seat shall be lifted to leave the track locked.
B. Lift the seat until it is away from the track locks.
C. Eject the seat until it is isolated from the track locks.
A. Do not jar the instruments
B. Do not pivot the instruments
C. Do not shake the instruments
A. The manufacturer may choose to include information on Unscheduled Maintenance Checks,including Time Limits/Inspections and Maintenance Checks,in a separate manual.Reference points must be listed in the maintenance manual.
B. For Unscheduled Maintenance Checks,the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals.The manual can be the Maintenance Manual.
C. The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks.Whether to include these information in an other manual is at the manufacturer's option.