A、 If you find cracks,refer to the structural repair manual for damage classification and corrective action.
B、 If you find the dents,according to the structural maintenance manual to get the damage group and take the correct action.
C、 In the event of finding gaps,read the structural maintenance manual to sort the loss and correct the action.
答案：A
A、 If you find cracks,refer to the structural repair manual for damage classification and corrective action.
B、 If you find the dents,according to the structural maintenance manual to get the damage group and take the correct action.
C、 In the event of finding gaps,read the structural maintenance manual to sort the loss and correct the action.
答案：A
A. 该程序应清楚地说明操作步骤,并以正确的工作流程按需接近并分步移除或安装软件。
B. 该程序应按照逻辑工作流程顺序,按需清楚地描述逐步操作,以接近并随后移除或安装硬件。
C. 该程序清晰地介绍了获取、移出或安装硬件所需的操作步骤,并且是按照正确的工作流程。
D. C.该程序清晰地介绍了获取、移出或安装硬件所需的操作步骤,并且是按照正确的工作流程。
A. The flight deck is located between the pressure dome and the front passenger door,and it is above the floor.
B. Cockpit is on the floor panel and between the pressure dome and the rear passenger partition.
C. Flight compartment is above the floor and between the forward passenger partition and the forward pressure dome.
A. 来自压气机的高压气体进入燃烧室并缓慢移动,并与被点燃的燃料混合。
B. 来自压气机的高压气体进入燃烧室并缓慢移动,并与易燃的燃料混合并点燃。
C. 来自压气机的缓慢移动的高压气体进入燃烧室,与易燃燃料混合并点燃。
A. 使用良好的设备去做这项检查以及目视检查。
B. 使用正确的设备去做这项检查而不是目视检查。
C. 使用正常的设备去做这项检查而不是目视检查。
A. 拆下机翼以及机身所有连接整流罩。
B. 拆下翼身整流罩。
C. 拆下机翼连接整流罩。
A. Grind the surface with a soft cloth after it becomes light.
B. Rub the surface with a soft cloth when it becomes brightness.
C. Polish the surface with a soft cloth until it becomes shiny.
A. 永久绑定的手册页不会过期。
B. 临时装订的手册页无需标注日期。
C. 永久装订的手册页不需要注明日期。
A. Make sure that the movement limits of the flight control surfaces are free.
B. Make sure that the travel ranges of the flight control surfaces are clear.
C. Make sure that the travel limits of the flight control rudders are clean.
A. In the event of filler bonding to the tool,dip the tool in cold water.
B. If the filler bonds to the tool,avoid using water to moisten the tool.
C. If the filler sticks to the tool,make the tool wet by applying cold water.
A. Please designate licensed personnel to do modification or maintenance to airplane.
B. Alterations or repairs to airplane shall be accomplished and noted by licensed personnel.
C. Please note that alterations or repairs to airplane must be accomplished by licensed personnel.
