A、 The release of high temperature wing anti-ice air will cause injury to persons.
B、 The opening of high pressure wing anti-ice air will cause injury to persons.
C、 Injury to persons can be caused by releasing the hot anti-ice liquid.
答案:A
A、 The release of high temperature wing anti-ice air will cause injury to persons.
B、 The opening of high pressure wing anti-ice air will cause injury to persons.
C、 Injury to persons can be caused by releasing the hot anti-ice liquid.
答案:A
A. The location where a red mark is on the pin needs to be lubricated.
B. You should identify the red mark on the lubricant point.
C. The lubrication point shows thatyou can find marks on the pin.
A. 这些装置能够在地面上用于稳定飞机并防止飞机因接触地面而造成损害的装置。包括减震支柱、防滑轮挡、机轮等。
B. 这些装置用于支撑在地面上的飞机并防止飞机因接触地面而造成损坏。它们包括减震支柱、防滑板、车轮等。
C. 这些装置用于支撑在地面上的飞机并防止飞机因接触地面而造成损坏。它们包括减震支柱、防滑板、车轮等。
D. C.这些装置用于支撑在地面上的飞机并防止飞机因接触地面而造成损坏。它们包括减震支柱、防滑板、车轮等。
A. 本程序给出了用于水管临时修理的两种方法。
B. 本程序给出了水管的永久修理方法。
C. 本程序详细阐述了两种方法来解决水管的修理。
A. Turn the cap counterclockwise.
B. Turn the cap clockwise.
C. Rotate the cap clockwise.
A. 根据结构修理手册进行永久性修理,对损伤部位填充 BMS-287 填充剂。
B. 根据故障修理手册进行恢复性修理,对损伤部位填充 BMS-287 填充剂。
C. 根据勤务手册进行翻新修理,对损伤部位填充 BMS-287 填充剂。
A. A separate document should be prepared for FAA approved airworthiness limitations which are excluded in the primary maintenance manual.
B. FAA approved airworthiness limitations shall be prepared as a separate document for inclusion in the principal maintenance manual.
C. FAA approved airworthiness limitations must be contained as an integrated documentation for inclusion in the main maintenance manual.
A. 燃烧室指发动机内燃油和空气混合并燃烧的部分。
B. 发动机混合室把燃油空气混合后点燃。
C. 发动机的做工段把燃油和空气混合并燃烧。
A. Pilot reports on flight logbook of908701 pages fluttering sound from left side of airplane during descend beginning at 11000 feet.
B. Pilot reports trembling sound from left side of airplane during ascend at 11000 feet on flight logbook 908701 page.
C. Pilot reports on flight logbook page 908701 fluttering sound from left side of airplane during descend beginning at 11000 feet.
A. 有两种方法来固定圆形螺栓。
B. 有两种方法将环形螺母放到蝶形盘上。
C. 有两种方法来固定环形螺母。
A. 这些部件很容易弯曲、断裂或不正确地对齐。
B. 这些部件很容易焊接、损坏或不正确地对齐。
C. 这些部件很容易焊接、断裂或不正确地装配。