A、 The approved repair part must contain the skill and technology required to carry up the repair.
B、 The approved repair portion shall include processes and techniques necessary for performing a repair .
C、 The necessary workmanship and skills constitute the approval of the repair portion.
答案：B
A、 The approved repair part must contain the skill and technology required to carry up the repair.
B、 The approved repair portion shall include processes and techniques necessary for performing a repair .
C、 The necessary workmanship and skills constitute the approval of the repair portion.
答案：B
A. 设置电门到位置 2 以得到正确的值。
B. 为获得正确的值,请将卡扣拔到 2 的位置。
C. 将把手切换到 2 的位置以获取正确的数值。
A. Do not smell the compound fumes.
B. Do not smell the solvent fames.
C. Do not breathe the solvent fumes.
A. Code is useless to identify the cables.
B. Put a code on the cables to identify them.
C. A tag should be attached to the cables.
A. 对现有分析进行了审查,以确定哪些部件和区域可能表现出较低安全边际。
B. 对现有分析进行了审查,以确定可能显示出较低安全裕度的组件和区域。
C. 现有的分析被审查,以确定可能阻止安全边际降低的部件和区域。
A. 拆卸/安装部分应清晰地描述拆卸和重新安装部件或装置所要求的步骤方法,以及应观察的预防措施。
B. 拆卸/安装部分应明确地说明拆卸和重新安装部件或装置所需的步骤要求,不需包含观察到的预防措施。
C. 拆卸/安装部分应清楚地说明拆卸和重新安装部件或装置所需的步骤顺序,以及应遵守的预防措施。
D. B.拆卸/安装部分应明确地说明拆卸和重新安装部件或装置所需的步骤要求,不需包含观察到的预防措施。
E. C.拆卸/安装部分应清楚地说明拆卸和重新安装部件或装置所需的步骤顺序,以及应遵守的预防措施。
A. Do not extend or retract landing gear above this speed.
B. Do not expand or retract landing gear at this speed.
C. Do not put down or retract landing gear by more than this speed.
A. Each door has flexible seals at its structure interface which protect the metal interfaces from damage by the airflow.
B. Each door has flexible seals at its structure interface which protect the metal interfaces from no damage by the airflow.
C. Each door has formalist seals at its structure interface which protect the metal interfaces from damage by the airflow.
A. 所有发行物应使用统一的编号系统进行索引从而进行主题事项分配。
B. 所有出版物应使用标准编号系统进行索引和主题事项分配。
C. 所有发行物应使用标准的编号索引系统来完成主题事项分配。
A. Check the fluid prior to mixing.
B. Prior to checking the fluid,ensure it has been mixed.
C. Never mix the fluid before testing.
A. 将上游的传感器拆掉,并再次检测温度。
B. 再次将探头向上游移动,并监控温度。
C. 将探头向上游移动并再次监控温度。
