A、 After finishing the following procedure,repair the upper flange.
B、 Repair the lower flange first during the procedure that follows.
C、 Repair the upper flange first during the following procedure.
答案:C
A、 After finishing the following procedure,repair the upper flange.
B、 Repair the lower flange first during the procedure that follows.
C、 Repair the upper flange first during the following procedure.
答案:C
A. Obey the procedure if there is no debris in the oil sample.
B. If the fuel is not polluted,go on with the procedure.
C. If there is no contamination in the fuel sample,continue the procedure.
A. It is up to the manufacturer to decide whether time limits/inspection and maintenance checks should be included in a separate manual or in a maintenance manual.
B. It is the manufacturer's option to place Time Limits/Inspections and Maintenance Checks in a separate manual on condition that they are also included in the Maintenance Manual.
C. Time Limits/Inspections and Maintenance Checks can be included in he Maintenance manual provided they have already been placed in a separate manual by the manufacturer.
A. 大翼的主要结构框架包括梁、肋、桁条、燃油箱整体结构、翼尖油箱支撑结构和开口周围结构。
B. 大翼的主要框架包括隔框、肋、加强筋、内部燃油箱结构、翼尖油箱支撑结构和结构周围的开口。
C. 大翼的主要结构包括翼梁、隔框、肋条、内部燃油箱结构、翼尖油箱支撑结构和结构周围的开口。
D. C.大翼的主要结构包括翼梁、隔框、肋条、内部燃油箱结构、翼尖油箱支撑结构和结构周
E. C.大翼的主要结构包括翼梁、隔框、肋条、内部燃油箱结构、翼尖油箱支撑结构和结构周围的开口。
A. 在 APU 运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B. 在 APU 运转过程中,检查滑油温度传感器的滑油渗漏程度。
C. 在 APU 运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
A. 将温度计调到摄氏温标。
B. 将温度计校准到华氏温标。
C. 调整摄氏温标的温度计。
A. 操作调光开关,确保光线的强度发生变化。
B. 操作旋转式开关,确保灯光发生变化。
C. 已调节明暗开关,灯光的亮度发生了变化。
A. Replace the defective booster pump.
B. Remain the present booster pump.
C. Recharge the failed booster pump.
A. 转弯协调器感知并指示横滚和偏航的速度。转弯协调器中陀螺的转子向上倾斜 30°。此时,它不仅响应纵轴上的运动,而且响应立轴上的滚动运动。
B. 转弯倾斜器感知并指示横滚和偏航率。转弯倾斜器中陀螺的转子向上倾斜 30°。此时,它不仅响应立轴上的运动,而且响应纵轴上的滚动运动。
C. 转弯协调器感知并指示横滚和偏航率。转弯协调器中陀螺的转子向上倾斜 30 度。因此它不仅响应立轴上的运动,而且响应纵轴上的滚动运动。
D. C.转弯协调器感知并指示横滚和偏航率。转弯协调器中陀螺的转子向上倾斜 30 度。因此它不仅响应立轴上的运动,而且响应纵轴上的滚动运动。
A. 可参考的技术文件必须包含如勤务通告、勤务信件等。
B. 勤务通告、勤务信函包含在技术参考文件清单中。
C. 技术参考文件包括必要的文件清单,如服务通告、服务信函等。
A. 使用符号代表电磁活门,显示该活门是否是弹簧加载到开位或关位。
B. 应针对电磁活门标明注意事项,说明该活门应该弹簧加载到开位还是关位。
C. 电磁活门应标有符号,表明该活门是弹簧加载到开位还是关位。