A、 The shim is t,which is thick by calculating x and y.
B、 Calculate the shim,the result of the thickness is x-y .
C、 The thickness of the shim is thus calculated: t=x-y.
答案:C
A、 The shim is t,which is thick by calculating x and y.
B、 Calculate the shim,the result of the thickness is x-y .
C、 The thickness of the shim is thus calculated: t=x-y.
答案:C
A. The function of the portable water system is to store and send drinking water to the passengers.
B. The potable water system must keep and transfer the water to the toilet for washing only.
C. The purpose of the drinking water system is to store and deliver the water for drinking.
A. This procedure is only applicable to type A parts.
B. This task is only used for type A parts.
C. This procedure is applicable to all type parts.
A. 让飞机载荷平衡是飞机所有者和机长的责任。
B. 飞机被正确地系留是飞机维护者和飞行员的责任。
C. 飞机所有者和飞行员有责任确保飞机装载正常。
A. 压力管路分布在不同方位。
B. 压力管路往不同方向分开。
C. 压力管路的排布方向各有不同。
A. 作动时间必须在 28 至 40 秒之间,在某个方向作动电流不得超过 0.5 安培。
B. 指令要求作动时间必须在 28 至 40 秒之间,且作动电流不得少于 0.5 安培。
C. 在任何一个方向上作动的时间必须在 28 至 40 秒之间,且作动电流不得超过 0.5 安培。
A. Clamps should be spaced at intervals not exceeding 24 inches.Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
B. Pins should be spaced at intervals not exceeding 24 inches.Pins on harness should be selected so that they have a snug fit without pinching wires.
C. Pins should be spaced at intervals not exceeding 24 inches.Pins on harness should be selected so that they have a snug fit without scratching wires.
A. With the aid of the component manufacturer,all components in this chapter can be overhauled in any workshops with different qualifications.
B. Without the data supplied by the component manufacturer,it is possible for the most qualified shop to overhaul any components included in this chapter.
C. You must overhaul any or all components in this chapter in an eligible shop on the basis of data provided by the component manufacturer.
A. 不要使用金属制品,可能会割到或损坏上位锁弹簧表面。
B. 不要使用金属物件,可能会割到或损坏上位锁弹簧表面。
C. 不要使用金属制品,可能会划伤或损坏上位锁弹簧表面。
A. Some service reports were used to select items that are similar in application design and downloading to do the check.
B. Some sevice reports are used to select items that are similar in application,design and loading to do the inspection.
C. In order to do the inspection,some service reports used to choose programs similar in apply,design and loading.
A. 位置发射机安装在 PCU 下部。
B. 位置发射机安装在 PCU 上方。
C. PCU 安装在位置传感器的上方。