A、 If the right engine stops,what position will APU servo valve stop at?
B、 If the right engine is not running,what position willAPU bleed valve stop at?
C、 If the right engine stops,willAPU servo valve stop at close position?
答案:B
A、 If the right engine stops,what position will APU servo valve stop at?
B、 If the right engine is not running,what position willAPU bleed valve stop at?
C、 If the right engine stops,willAPU servo valve stop at close position?
答案:B
A. Rivets can be used to separate the two stringers.
B. You can use two rivets to attach the stringers together.
C. Use rivets to connect the two stringers together.
A. 本规范第 0.9 部分要求的表格内容可以采用补充材料的日志(或清单)形式。
B. 本规范第 0.9 段要求的目录可以采用补充材料的日志(或清单)形式。
C. 本规范第 0.9 节要求,表格内容可以在补充材料的日志(或清单)中。
A. Do not install 0.1 mm thick shims.
B. Do not install shims which are more than 0.1 deep.
C. Do not install shims that are more than 0.1 mm thick.
A. 在此推荐清单中,更换部件对于起落架收放系统和其相关的指示系统来讲是不合理的。
B. 在此推荐清单中,起落架收放系统和适用的指示系统没有可更换的部件。
C. 此推荐清单不能用于起落架放下系统部件更换但适用于指示系统。
A. 进气风扇和排气风扇用 V 形带扳手安装。箭头显示正确的安装方向。进气风扇和排气风扇不可装反。
B. 进气风扇和排气风扇用 V 形带卡箍安装。箭头指示正确的流向。进气风扇和排气风扇可互换。
C. 进气风扇和排气风扇用 V 形带卡尺安装。按照箭头显示的方向安装。进气风扇和排气风扇是可更换的。
D. B.进气风扇和排气风扇用 V 形带卡箍安装。箭头指示正确的流向。进气风扇和排气风扇可互换。
E. C.进气风扇和排气风扇用 V 形带卡尺安装。按照箭头显示的方向安装。进气风扇和排气风扇是可更换的。
A. Proper recipe shall be adopted to measure the pressure.
B. The pressure shall be estimated by using accurate equation.
C. Calculate the pressure with the applicable formula.
A. You may use alerts and cautions to emphasize some important places.
B. The important parts must be highlighted by using the warnings,cautions and notes.
C. Warnings,cautions and notes may be used to highlight or emphasize important points.
A. 打开客舱的一扇门,确保客舱不是全封闭的。
B. 打开客舱入口的一扇门,确保客舱没有增压。
C. 打开通往客舱的一扇门以保证通行没有压力。
A. 必须要注意不要损坏防火墙罩。
B. 小心损坏火墙盖子。
C. 核心必须要带走以不损坏防火墙罩。
A. 《持续适航维修大纲》检查文件编号中系统代号的两位数字应使用 GAMA 第 2 号规范的编号体系。
B. 在《持续适航维修大纲》检查文件编号中,代表章号的两位数字应遵循 GAMA 第 2 号规范的编号体系。
C. 《持续适航维修大纲》检查文件编号中的两个数字应由 GAMA 第 2 号规范中的编号系统决定。
D. B.在《持续适航维修大纲》检查文件编号中,代表章号的两位数字应遵循 GAMA 第 2 号规范的编号体系。
E. C.《持续适航维修大纲》检查文件编号中的两个数字应由 GAMA 第 2 号规范中的编号系统决定。