A、 If the hydraulic pump turns to generate pressure of 3000 psi,use the electric pump.
B、 If the hydraulic pump fails to generate pressure of 3000 psi,use the electric pump.
C、 If the hydraulic pump turns to supply pressure of 3000 psi,use the electric pump.
答案:B
A、 If the hydraulic pump turns to generate pressure of 3000 psi,use the electric pump.
B、 If the hydraulic pump fails to generate pressure of 3000 psi,use the electric pump.
C、 If the hydraulic pump turns to supply pressure of 3000 psi,use the electric pump.
答案:B
A. 这个手册需要花费两个小时读完。
B. 做这个程序需要两个小时。
C. 两个小时必须完成这个程序。
A. 前言中包括与 CAP 的程序关系,正常检查在产品说明中。
B. CAP 中要说明产品与正常检查之间的程序关系。
C. 前言中包含 CAP 与产品正常检验程序的关系。
A. 飞行员操作手册的本节应描述飞机的方式,该方式应是制造商认为合理且能为飞行员提供有效的信息。
B. 飞行员操作手册的本节应以制造商认为对最有可能操作飞机的飞行员来说最能提供有效信息的方式来描述飞机。
C. 飞行员操作手册的本节内容应以合理的方式描述飞机,且是制造商认为最能为飞行员提供有效信息的。
D. B.飞行员操作手册的本节应以制造商认为对最有可能操作飞机的飞行员来说最能提供有效信息的方式来描述飞机。
E. C.飞行员操作手册的本节内容应以合理的方式描述飞机,且是制造商认为最能为飞行员提供有效信息的。
A. 确保层压板表面的温度保持恒定。
B. 保持温度恒定通过层板横截面。
C. 保证层板间的温度保持稳定。
A. If an AC circuit consists of resistance only,the value of the impedance is the same as the resistance.
B. If an AC circuit consists of impedance only,the value of the capacitance is the same as the impedance.
C. If an DC circuit has capacitance only,the value of the resistance is the same as the capacitance.
A. A reprint is a second or executive version of a manual that replaces a previous version.
B. A reprint is a succeeding or pursuant version of a manual that supersedes the former version.
C. A reissue is a second or subsequent edition of a manual which supersedes the preceding edition.
A. 为了重复步骤,耦合器问收发机要另一个调谐电源的简短降级。
B. 耦合器问收发机要另一个调谐电源的简短降级目的是步骤简化。
C. 对于校准步骤,耦合器向收发机要求另一个调谐电源的短暂降级。
A. Use the clean solvent again to leave the oils on the surface.
B. If necessary,clean the oils by applying clean solution.
C. Remove the oils,if necessary,by applying clean solvent again.
A. 如果转子突然停止,请检查进气中是否含有不需要的杂质。
B. 如果转子突然停止转动,检查进气道是否存有外来物。
C. 如果转子突然停止,请检查进气口是否有需要的杂物。
A. Ensure that the label adheres tightly to the surface and that no bubbles are present.
B. Verify the full attachment of the label to the surface and accept the presence of bubbles.
C. Make sure the label is partially attached to the surface,ensuring there are no bubbles present.