A、 The values must be less than the approved differences.
B、 The values must not exceed the allowable differences.
C、 The values must be less than the allowable differences.
答案:B
A、 The values must be less than the approved differences.
B、 The values must not exceed the allowable differences.
C、 The values must be less than the allowable differences.
答案:B
A. 安全须知的开头要用清晰简单的指令或条件。
B. 安全指令的拟定要清晰、简明或符合条件。
C. 发出清晰、简单的指示或给出条件以启动安全指令。
A. The EEC processes the simulated signal from the fuel filter differential pressure bulb.
B. The fuel filter differential pressure sensor sends an modulated signal to the EE
C. The EEC receives the analog signal from the fuel filter differential pressure switch.
D. C.The EEC receives the analog signal from the fuel filter differential pressure switch.
A. The system is pneumatically operated and mechanically controlled.
B. Hydraulic power drives the system,while electricity is connected.
C. The system is hydraulically operated and electrically controlled.
A. 为防止热损坏襟翼,地面测试自动停止于 30 秒后。
B. 为了阻止热量损伤副翼,地面测试在 30 秒后自发停止。
C. 为防止热损坏缝翼,地面测试在 30 秒后自动停止。
A. Examine the area that is around the drain holes for signs of corrosion.
B. Check the scavenge hole and areas around it for corrosion.
C. Make sure that there's no corrosion around the drain hole.
A. You can not remove the battery.Only an approved service provider can replace it.
B. Do not replace the battery.Only an approved service provider can replace it.
C. Do not replace the battery.Only an approval of a service provider can replace it.
A. Do a tire pressure check,and if necessary inflate the tires.
B. Check the pressure of a wheel and charge it if necessary.
C. Inspect the tire pressure and it's required to refuel.
A. The gearbox is installed behind the pneumatic motor.
B. The pump is installed behind the hydraulic motor.
C. The pump is installed behind the pneumatic turbine.
A. 必须列出储液箱的容量,包括美制、英制和公制单位。必须提供燃油、滑油、液压油和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃油,应给出膨胀体积、总燃油容量、油箱容积和净燃料容量(如适用)。对于滑油,应考虑到膨胀的余地。
B. 必须列出储液箱的容量,包括美制、英制度量和其他测量单位。必须提供燃料、油、液体和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃料,应给出膨胀体积、总燃料容量、沉淀容量和净燃料容量(如适用)。对于油,应给出膨胀允许量。
C. 必须列出储液箱的容量,包括美制、英制度量和其他测量单位。必须提供燃料、油、液体和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃料,应给出膨胀体积、总燃料容量、沉淀容量和净燃料容量(如适用)。对于油,应考虑到膨胀的余地参考答案:A
D. B.必须列出储液箱的容量,包括美制、英制度量和其他测量单位。必须提供燃料、油、液体和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃料,应给出膨胀体积、总燃料容量、沉淀容量和净燃料容量(如适用)。对于油,应给出膨胀允许量。
E. C.必须列出储液箱的容量,包括美制、英制度量和其他测量单位。必须提供燃料、油、液体和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃料,应给出膨胀体积、总燃料容量、沉淀容量和净燃料容量
F. C.必须列出储液箱的容量,包括美制、英制度量和其他测量单位。必须提供燃料、油、液体和其他材料使用的 ANA 或其他标准规范号和等级(如果适用)。为了便于修改,规格和等级应显示在一页上。对于燃料,应给出膨胀体积、总燃料容量、沉淀容量和净燃料容量(如适用)。对于油,应考虑到膨胀的余地
A. Use the upper latch mechanism to lock the lower display unit in the middle.
B. The latch mechanism at the top is used to secure the center display unit on the bottom.
C. The center lower display unitis installed with the latch mechanism at the top.