A、 拧松螺钉,但同时不要给它们打力矩。
B、 拧紧螺栓,但此时不要扭矩它们。
C、 拧紧螺母,但此时不要给它们打力矩。
答案:C
A、 拧松螺钉,但同时不要给它们打力矩。
B、 拧紧螺栓,但此时不要扭矩它们。
C、 拧紧螺母,但此时不要给它们打力矩。
答案:C
A. If you must apply a strike to open the unit,examine the control linkage.
B. If you must apply an unusual force to open the unit,examine the turnbuckle.
C. If you must apply an unusual force to open the unit,examine the control linkage.
A. If there is a available service bulletin to correct the problem of moisture ingress into the connector cavity,the letter then will be useless.
B. Refer to this letter tohelp mitigate moisture ingress into the connector cavity even if there is a available servicebulletin to correct the problem.
C. If there is a available service bulletin to correct the problem that moisture ingress into the connector cavity,the letter then will provide procedures .
A. 防止部件移动以便能修理装置。
B. 当你修理附件时要避免部件运动。
C. 当你修理组件时应防止部件移动。
A. 自动油门自动控制油门的位置,以在着陆/进近和复飞过程中将发动机功率与襟翼位置和飞机俯仰姿态适当地结合在一起。
B. 自动油门自动控制节流阀的位置,以在着陆/进近和绕行过程中将发动机功率与襟翼位置和飞机俯仰姿态适当地结合在一起。
C. 自动油门自动控制节流阀的位置,以在着陆/进近和绕行过程中将发动机功率与襟缝翼位置和飞机俯仰姿态适当地结合在一起。
D. C.自动油门自动控制节流阀的位置,以在着陆/进近和绕行过程中将发动机功率与襟缝翼
E. C.自动油门自动控制节流阀的位置,以在着陆/进近和绕行过程中将发动机功率与襟缝翼位置和飞机俯仰姿态适当地结合在一起。
A. 维护手册应提供标牌或标签的位置和图示, 以表明哪些是最低设备清单要求的。
B. 维护手册应提供标牌或标签的位置和图示, 以表明哪些是最低设备清单项目。
C. 维护手册应提供标牌或标记的位置和图示, 以表明哪些是最低设备清单要求的。
A. 封面上的信息将由制造商自行决定。
B. 封面包含的信息将由制造商保留。
C. 封面必须包含制造商保留的信息。
A. Lubricate the engine and its accessories with the same brand.
B. Lubricants for the engine and the auxiliary equipment are the same.
C. The engine and the additional devices are greased in a same manner.
A. Do not perform any work to the aircraft during maintenance.
B. It is forbidden to refuel the aircraft during maintenance.
C. You can add fuel to the aircraft at any time.
A. You can use the left cut to enter.
B. Use the left opening for easy access.
C. Left opening is used to move easily.
A. 每本手册都应有导言,内容除了包括厂家技术出版物清、或清单的参考位置以外,还需简要说明手册的组织、内容和使用方法。
B. 每本手册都应包括介绍,简要说明其组织机构、手册内容和手册使用方法。额外的清单或参考清单位置要包括在制造商技术出版物中发布。
C. 每本手册都应有前言,其中要说明机构、内容,以及除了制造商技术出版物清单、清单位置的引用手册使用方法做简要说明。
D. C.每本手册都应有前言,其中要说明机构、内容,以及除了制造商技术出版物清单、清单位置的引用手册使用方法做简要说明。