A、 对现有的分析进行了审查,以确定可能存在安全裕度较低的部件和区域。
B、 从分析结果发现,有部件和相关区域显示出安全性能较低的迹象。
C、 故障分析结果显示,某些部件和区域现有些安全指标达不到设计要求。
答案:A
A、 对现有的分析进行了审查,以确定可能存在安全裕度较低的部件和区域。
B、 从分析结果发现,有部件和相关区域显示出安全性能较低的迹象。
C、 故障分析结果显示,某些部件和区域现有些安全指标达不到设计要求。
答案:A
A. 此说明帮助您找到相关的适用 STE 规则和不同特定主题。
B. 此索引帮助您找到与不同特定主题相关的适用 STE 规则。
C. 此指数可以帮助您找到不同于特定主题相关的适用 STE 规则。
A. Find appropriate torque values in the table above.
B. Refer to the table that follows for the applicable torque values.
C. Proper torque values can be found in the booklet attached.
A. Documents must be temporarily edible.
B. Documents must be readily revisable.
C. Documents must be permanently durable.
A. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示地线(N)、相位(A、B 等)或热电偶材料(铝镁合金等)。
B. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示接地(N)、阶段(A、B 等)或热敏电门材料(铝镁合金等)。
C. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示地线(N)、相位(A、B 等)或热敏电门材料(铝镁合金等)。
A. 在程序中,提供简短,清晰的指令并且直接向读者讲话。
B. 在程序中给出简短,清晰的指令,直接向读者陈述。
C. 在程序执行中,要向读者直接发话,给出简短清晰的指令。
A. 对邻近区域做检查。
B. 对表面区域做检查。
C. 对内部区域做检查。
A. CAP 检查列出制造商建议的零件或组件的报废时间(使用小时数、循环或其他适当的决定因素)和 FAA 要求的关于时寿零件或组件的报废(维护拆换)时间。
B. CAP 检查设定四家推荐的制造商的零件或组件退役时间(使用时间、周期或其他适当的计算方法)和 FAA 要求的时间限制零组件的退役(维护拆换)时间。
C. CAP 检查包在建议的厂家零部件退役时间(使用时间,周期或其他合适的计量因子)和
D. B.CAP 检查设定四家推荐的制造商的零件或组件退役时间(使用时间、周期或其他适当的计算方法)和 FAA 要求的时间限制零组件的退役(维护拆换)时间。
E. C.CAP 检查包在建议的厂家零部件退役时间(使用时间,周期或其他合适的计量因子)和
F. AA 要求的零部件退役(不服役)时间后进行。
A. 拆下机翼以及机身所有连接整流罩。
B. 拆下翼身整流罩。
C. 拆下机翼连接整流罩。
A. APU start attempts are inhibited above 25,000 feet with both busses off,only one start attempt is allowed below 25000 feet.
B. With both busses power off,APU start attempts is recommended above 25000 feet and only one start could be accepted below 25,000 feet.
C. APU start attempts are not recommended above 25,000 feet.With both busses off,only one start attempt is recommended below 25,000 feet.
A. If an AC circuit consists of resistance only,the value of the impedance is the same as the resistance.
B. If an AC circuit consists of impedance only,the value of the capacitance is the same as the impedance.
C. If an DC circuit has capacitance only,the value of the resistance is the same as the capacitance.