A、 最常见的的错误是发生在将油量单位从夸脱转换成加仑的极限装载检查中。
B、 在极限装载检查中,最常见的的错误是没有将滑油单位从夸脱转换成加仑。
C、 在极限装载检查中,最常见的错误是把滑油单位从夸脱转换成加仑。
答案:B
A、 最常见的的错误是发生在将油量单位从夸脱转换成加仑的极限装载检查中。
B、 在极限装载检查中,最常见的的错误是没有将滑油单位从夸脱转换成加仑。
C、 在极限装载检查中,最常见的错误是把滑油单位从夸脱转换成加仑。
答案:B
A. 供气系统被多个子系统共用,能够为水箱加压以确保流体的流动。
B. 空气供应系统是某一个子系统独用的部分,其作用是为供应罐加压以确保流体流动。
C. 空气供应系统是多个子系统共用的部分,其作用是为供应罐减压以延缓流体流动。
A. 在所有起飞、降落、加速-停止、加速-飞行和其他跑道性能中,有效风分量应取逆风风力的 50%和顺风风力的 150%。
B. 在计算所有起飞、着陆、中断起飞、加速滑跑和其他跑道性能中,跑道上的有效风分量为 150%的逆风分量,50%的顺风分量。
C. 计算起飞距离、着陆距离、加速停止距离、加速起飞距离和其他跑道性能数据时,沿跑道有效风风量应为 50%逆风分量和 150%顺风分量。
D. C.计算起飞距离、着陆距离、加速停止距离、加速起飞距离和其他跑道性能数据时,沿跑
E. C.计算起飞距离、着陆距离、加速停止距离、加速起飞距离和其他跑道性能数据时,沿跑道有效风风量应为 50%逆风分量和 150%顺风分量。
A. Clear the pipes in order to remove corrosion.
B. Wash the pipes so as to remove dust.
C. Flush the pipes to remove contamination.
A. 风干过滤器。
B. 在大气中干燥排油口。
C. 在空中排干加油口。
A. Use special crank to rotate shaft of reel assembly clockwise to unwind the harness assembly from the spool.
B. Use special handle to turn the roller of spool assembly clockwise to wind the harness assembly from the reel.
C. Use special crank to rotate the spool of reel assembly clockwise to unfold the harness assembly from the shaft.
A. Through releasing the handle,the gas start to inflate the slide-raft .
B. Operation of the handle releases the gas which can inflate the slide-raft.
C. The gas handle operates to inflate the slide-raft.
A. Do not apply too much composite on the blanket.
B. Do not apply too much adhesive on the gasket.
C. Do not apply too much compound on the gasket.
A. 两个半圆形的挡板控制空气流。
B. 两个半导体的金属圈控制空气流。
C. 两个半圆形的金属圈控制空气流。
A. Pilot reports on flight logbook of908701 pages fluttering sound from left side of airplane during descend beginning at 11000 feet.
B. Pilot reports trembling sound from left side of airplane during ascend at 11000 feet on flight logbook 908701 page.
C. Pilot reports on flight logbook page 908701 fluttering sound from left side of airplane during descend beginning at 11000 feet.
A. 环境系统包括的那些装置和部件,提供增压、加热、冷却、湿度控制和过滤,并对压力密封的机身区域的通风空气进行处理。
B. 通风系统包括的装置和部件可以用于加压、加热、冷却,湿度控制、处理空气,从而为压力密封内区域通风。
C. 循环系统包括那些装置和部件,提供释压、加热、冷却、温度控制、压缩和处理空气,来为压边封严条内的区域通风。
D. B.通风系统包括的装置和部件可以用于加压、加热、冷却,湿度控制、处理空气,从而为压力密封内区域通风。
E. C.循环系统包括那些装置和部件,提供释压、加热、冷却、温度控制、压缩和处理空气,来为压边封严条内的区域通风。