1364.ldentify a revision to an illustration with a black vertical line in the left margin opposite the revised portion or use a "pointing hand".

A. The cover contains manufacturer's information and will be subject to its discretion.

B. The cover is determined by the manufacturer and the information should be comprehensive.

C. The information to be included on the cover will be left to the manufacturer's discretion.

A. 该任务通过调节变频起动机发电机空气/油热交换器上的空气控制活门不工作状态使飞机恢复到正常状态。

B. 在变频起动机发电机空气/油热交换器上的空气控制活门不工作的情况下,该任务在操作后使飞机恢复到正常状态。

C. 该任务使变频起动机发电机空气/油热交换器上的空气控制活门失效状态恢复,从而使飞机恢复到操作后的通常状态。

D. C.该任务使变频起动机发电机空气/油热交换器上的空气控制活门失效状态恢复,从而使飞机恢复到操作后的通常状态。

A. The portion of the systemis used to eliminate or prevent the formation of ice on all airfoil surfaces,including wings and airfoil sections of the empennage.

B. The portion of the systemis used to dispel or get rid of ice gathering on some aircraft surfaces,including wings and empennage surfaces.

C. The portion of the system is used to eliminate or forbid ice forming on outside parts of all airfoils,including the airfoils of wings and empennage.

A. The Preface has been omitted in the sample CAP in Section Ill and the necessary information has been included in the Objectives.

B. The Objectives of third CAP sample is omitted and the necessary information is included in the Preface description.

C. The necessary information has been included in the sample description,so the CAP III omitted the Objectives in the Preface.

A. 左大翼二号油箱盖板断裂。

B. 左大翼二号油箱接近门变形。

C. 左大翼二号油箱入口门脱落。

A. Basic control and operation information describing how the airplane components are controlled and how they operate,including any special procedures,and limitations that apply.

B. Basic control and operation information describing how the airplane components are controlled and operated,including any special procedures,and limitations that apply.

C. Basic control and operation information describing how the airplane components control and operate,including any special procedures and limitations that apply.

A. 当反推收回时,确保飞机远离人员。

B. 当反推放出时,确保人员远离飞机。

C. 当反推运动时,确保人员远离飞机。

A. At the manufacturer's option,static pressure systems description and discussion may be combined with Paragraph 7.49,Pitot Pressure Systems.

B. The manufacturer could combine the description and discussion of the dynamic pressure systems in Paragraph 7.49,Pitot Pressure Systems.

C. The manufacturer decides to insert static pressure systems description and discussion into Paragraph 7.49,Pitot Pressure Systems.

A. After finishing the following procedure,repair the upper flange.

B. Repair the lower flange first during the procedure that follows.

C. Repair the upper flange first during the following procedure.

A. Open the isolating valves.

B. Open the check valves.

C. Open the bypass valves.