A、 为防止损坏发动机,立即打开所有安装的防护罩。
B、 为防止损坏发动机,稍候装上所有开口的防护罩。
C、 为防止损坏发动机,立即在所有开口上安装防护罩。
答案:C
A、 为防止损坏发动机,立即打开所有安装的防护罩。
B、 为防止损坏发动机,稍候装上所有开口的防护罩。
C、 为防止损坏发动机,立即在所有开口上安装防护罩。
答案:C
A. 可以通过使用抹布沿钢索擦拭的方法,实现对钢索关键疲劳区域的仔细检查。
B. 可以通过沿电缆缠绕碎布的方式来对电缆关键疲劳区域进行仔细检查。
C. 在钢索严重疲劳区域进行近距离检查,可沿钢索用棉布清洁。
A. 如可以,在重新安装或更换新的隔热棉之前,先使用潮湿的绝缘毯。
B. 在重新安装前,将湿的隔热棉弄干;如适用,更换新的隔热棉。
C. 在干燥湿隔热棉之后,根据需要重新安装或更换新的隔热棉。
A. 应提供重量平衡装载表,同时提供相关计算程序的解释说明
B. 应提供重量和平衡载荷表以及说明计算程序。
C. 应提供重量和平衡载荷表以及计算步骤说明。
A. Light surface blooming,which can occur on items in storage,is not detrimental to the component.
B. Surface blooming,often found on corroded items,has little adverse effect on the component when it is mild.
C. Items in storage tend to have surface blooming which is beneficial to the component.
A. 使用一种润滑油,这种润滑油可以润滑松紧螺套。
B. 使用油壶润滑松紧螺套。
C. 使用油罐润滑锁扣。
A. 所有官方技术名称都由三个以上名词组成,在第一次出现时都是完整的。然后,在正文的其余部分,使用相关的批准缩写。
B. 所有由三个以上名词组成的官方技术名称都要写全第一个词。然后,在正文的其余部分,使用相关的正规缩写。
C. 所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文章的其余部分使用相应的批准缩写。
D. C.所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文
E. C.所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文章的其余部分使用相应的批准缩写。
A. Attach the threading cord to the new cable.
B. Attach the screw's cord to the new cable.
C. Attach the screw's wire to the new cable.
A. The mechanic removed the cable roller and examined the surrounded area in detail.No other defects were found.
B. The mechanic removes the cable rotor and examines the adjacent area in detail.No other defects are noted.
C. The mechanic removed pulley and inspected the surrounding area in detail with no other defects found.
A. 进气口由很多部件组成,包括机头整流罩、涡流发生器以及管道。
B. 进气口由很多部件组成,包括前环形整流罩、涡流发生器以及电缆。
C. 进气道包括前环形整流罩、涡流发生器以及管路等部件。
A. If the drain hole is blocked,clean it.
B. If the drain hole is leaked,clean it.
C. If the drain hole is locked,clean it.