A、 /P 灯闪烁。
B、 当自动飞行系统被断开时,自动飞行状态信号灯(ASA)上的红色 A/P 信号闪烁,从而可以听到声音警告模块发出声音警告。
C、 当自动驾驶断开时,声音警告模块发出声音警告,自动飞行状态指示器(ASA)上的红色
D、 B.当自动飞行系统被断开时,自动飞行状态信号灯(ASA)上的红色 A/P 信号闪烁,从而可以听到声音警告模块发出声音警告。
E、 C.当自动驾驶断开时,声音警告模块发出声音警告,自动飞行状态指示器(ASA)上的红色
F、 A/P 灯闪烁。
答案:C
A、 /P 灯闪烁。
B、 当自动飞行系统被断开时,自动飞行状态信号灯(ASA)上的红色 A/P 信号闪烁,从而可以听到声音警告模块发出声音警告。
C、 当自动驾驶断开时,声音警告模块发出声音警告,自动飞行状态指示器(ASA)上的红色
D、 B.当自动飞行系统被断开时,自动飞行状态信号灯(ASA)上的红色 A/P 信号闪烁,从而可以听到声音警告模块发出声音警告。
E、 C.当自动驾驶断开时,声音警告模块发出声音警告,自动飞行状态指示器(ASA)上的红色
F、 A/P 灯闪烁。
答案:C
A. If your decision is not to change the unit,monitor its temperature at least 15 rotations.
B. If you decide not to renew the unit,supervise its temperature at least 15 periods.
C. If your decision is not to replace the unit,monitor its temperature for a minimum of 15 cycles.
A. On the label,read the date of the last inspection.
B. Check the date of latest inspection on the log.
C. On the label,make sure the date of last check.
A. 确保皮托管温度增加至 500 摄氏度以上。
B. 确保机外环境温度增加 500 摄氏度。
C. 确保探头温度增加至 500 摄氏度以上。
A. This section includes all the limits of the optional systems and equipment.
B. Limitations related to optional systems may be contained in this section.
C. Only the limitations which are relevant to optional systems might be including in this section.
A. Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275°F (107 to 135°C) for a minimum of one hour.
B. Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275°F (107 to 135°C) for a maximum of one hour.
C. All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275°F (107 to 135°C) for a minimum of one hour.
A. 如果可行的话,手册中出现的计量单位应该保持一致。
B. 实际上,手册中出现的测量值必须保持一致。
C. 手册使用的计量单位必须与实际情况保持一致。
A. You can not remove the battery.Only an approved service provider can replace it.
B. Do not replace the battery.Only an approved service provider can replace it.
C. Do not replace the battery.Only an approval of a service provider can replace it.
A. 4 个轴承支撑 N2 轴的后部。
B. 第 4 号轴承支撑 N2 轴的后部。
C. 第 4 号轴承支持 N2 轴的前部。
A. 相对时间内的的生产效率就是相对生产率.
B. 速率是速度在一定时间的变化.
C. 加速度是速度随时间的变化率.
A. 供气系统被多个子系统共用,能够为水箱加压以确保流体的流动。
B. 空气供应系统是某一个子系统独用的部分,其作用是为供应罐加压以确保流体流动。
C. 空气供应系统是多个子系统共用的部分,其作用是为供应罐减压以延缓流体流动。