A、 数据应显示外界温度、高度和风与起飞距离的关系。应包括地面滑跑距离和飞机达到高于地面 50 英尺的总起飞距离。达到这些距离所需的速度需应以指示空速给出。
B、 数据应显示为距离与外界大气温度、高度和风的关系。应包括地面滑跑和超过 50 英尺障碍物的总距离。达到这些距离所需的速度应在指示空速中规定。
C、 数据应以起飞距离与外界空气温度、高度和风力的关系来表示。地面横滚和 50 英尺障碍物的总距离都应包括在内。达到这些距离所需的速度应以指示空速进行计算。
D、 C.数据应以起飞距离与外界空气温度、高度和风力的关系来表示。地面横滚和 50 英尺障碍物的总距离都应包括在内。达到这些距离所需的速度应以指示空速进行计算。
答案:A
A、 数据应显示外界温度、高度和风与起飞距离的关系。应包括地面滑跑距离和飞机达到高于地面 50 英尺的总起飞距离。达到这些距离所需的速度需应以指示空速给出。
B、 数据应显示为距离与外界大气温度、高度和风的关系。应包括地面滑跑和超过 50 英尺障碍物的总距离。达到这些距离所需的速度应在指示空速中规定。
C、 数据应以起飞距离与外界空气温度、高度和风力的关系来表示。地面横滚和 50 英尺障碍物的总距离都应包括在内。达到这些距离所需的速度应以指示空速进行计算。
D、 C.数据应以起飞距离与外界空气温度、高度和风力的关系来表示。地面横滚和 50 英尺障碍物的总距离都应包括在内。达到这些距离所需的速度应以指示空速进行计算。
答案:A
A. 货舱里有地板和衬层。衬层防止货舱内出现烟雾,防止对衬层和导线造成损坏。
B. 货舱里有地板和衬层。衬层使烟雾留在货舱,防止对衬层和导线造成损坏。
C. 货舱里有地板和衬层。衬层使烟雾留在货舱,防止对管路和导线造成损坏。
A. 飞机总体布局应该包括平面图、侧面图和前视图的刻度说明。
B. 飞机总体布局应由刻度线图画来阐释,包括计划图、侧视图和前视图。
C. 飞机的总体布局应由比例尺线条图阐明,包括平面图、侧视图和前视图。
A. The AFDSmonitorsthree separate autopilot channels and a single Mode Control Panel(MCP)
B. The AFDSconstitutes three separate autopilot channels and a single Mode Control Panel(MCP)
C. The AFDS contains three separate autopilot channels and a single Mode Control Panel(MCP)
A. Take the oxygen mask in a hurry to start the flow of oxygen.
B. Pull the oxygen mask with a sudden movement to start the flow of oxygen.
C. Pull the oxygen mask in a must to start the flow of oxygen.
A. Make sure that the movement limits of the flight control surfaces are free.
B. Make sure that the travel ranges of the flight control surfaces are clear.
C. Make sure that the travel limits of the flight control rudders are clean.
A. 应排布线路图,以便可以监测系统的最小流量。
B. 横隔板的布局方式使得追查系统流向的工作变得不费力气。
C. 图表的排列应便于花最小的力气即可追踪系统的流程。
A. Make an estimate of the necessary quantity.
B. Evaluate on the quantity available.
C. Approximate the scale of the quality.
A. Make sure that there is supplied airflow in the work area.
B. Make sure that there is sufficient airflow in the work area.
C. Make sure that there is efficient airflow in the work area.
A. The brackets should be connected to the nearest components.
B. Align the brackets with the adjacent components.
C. Keep the brackets engaged with the nearby components.
A. 标准空速是指飞机的表显速度。
B. 校准空速是指飞机的指示速度。
C. 飞机的指示空速应为校准后的速度。